Abstract:Friction compensation is particularly important for motion trajectory tracking control of pneumatic cylinders at low speed movement. However, most of the existing model-based friction compensation schemes use simple classical models, which are not enough to address applications with high-accuracy position requirements. Furthermore, the friction force in the cylinder is time-varying, and there exist rather severe unmodelled dynamics and unknown disturbances in the pneumatic system. To deal with these problems effectively, an adaptive robust controller with LuGre model-based dynamic friction compensation is constructed. The proposed controller employs on-line recursive least squares estimation (RLSE) to reduce the extent of parametric uncertainties, and utilizes the sliding mode control method to attenuate the effects of parameter estimation errors, unmodelled dynamics and disturbances. In addition, in order to realize LuGre model-based friction compensation, the modified dual-observer structure for estimating immeasurable friction internal state is developed. Therefore, a prescribed motion tracking transient performance and final tracking accuracy can be guaranteed. Since the system model uncertainties are unmatched, the recursive backstepping design technology is applied. In order to solve the conflicts between the sliding mode control design and the adaptive control design, the projection mapping is used to condition the RLSE algorithm so that the parameter estimates are kept within a known bounded convex set. Finally, the proposed controller is tested for tracking sinusoidal trajectories and smooth square trajectory under different loads and sudden disturbance. The testing results demonstrate that the achievable performance of the proposed controller is excellent and is much better than most other studies in literature. Especially when a 0.5 Hz sinusoidal trajectory is tracked, the maximum tracking error is 0.96 mm and the average tracking error is 0.45 mm. This paper constructs an adaptive robust controller which can compensate the friction force in the cylinder.

Supervised Adaptive Method for Robust and Fast Solving of Lubrication Problems

Development And Simulation Of Lubrication Test System For Port Plate/Cylinder Block In Axial Piston Pump

Adaptive Robust Motion Trajectory Tracking Control of Pneumatic Cylinders with LuGre Model-Based Friction Compensation

Adaptive Robust Control Of Variable Displacement Pumps

Design and Optimization of Self-Compensation Oil Distributor for Hydraulic Motors

An Assessment of Quantitative Predictions of Deterministic Mixed Lubrication Solvers

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Adaptive Robust Motion Control of the Surface Mounting Equipment with Dynamic Friction Compensation

A Spare Support Vector Machine Based Fault Detection Strategy On Key Lubricating Interfaces Of Axial Piston Pumps

Optimization Tool Based on Multi-Objective Adaptive Surrogate Modeling for Surface Texture Design of Slipper Bearing in Axial Piston Pump

Iteration Framework for Solving Mixed Lubrication Computation Problems

LuGre model–based robust adaptive control for a pump-controlled hydraulic actuator experiencing friction

Adaptive Robust Control of Linear Electrical Loading System with Dynamic Friction Compensation

Mixed EHL Problems: an Efficient Solution to the Fluid–Solid Coupling Problem with Consideration of Elastic Deformation and Cavitation

A new numerical method for planar multibody system with mixed lubricated revolute joint

Tribilogical performances of connecting rod and by using orthogonal experiment, regression method and response surface methodology

Robust joint estimation of sideslip angle and tire lateral force for distributed drive electric vehicle

Adaptive Robust Control of the Surface Mounting Equipment Based on Dynamic LuGre Model

An Integrated Knowledge and Data Model for Adaptive Diagnosis of Lubricant Conditions

Multi-objective optimization of lubricant volume in an ELSD considering thermal effects

A Fast, Robust, Straightforward Algorithm for Thermal Elastohydrodynamic Lubrication