Abstract:Wafer bonding, also termed as “direct bonding” or “wafer direct bonding”, has one of the main advantages for its ability to integrate dissimilar materials in various areas of microelelctronics, optoelectronics, micro/nanoelectromechanical systems (M/NEMS). Silicon is the most extensively used material for semiconductor industry. To meet demands on superior electrical, optical and acoustic applications, it is important to combine silicon with appropriate materials, such as GaAs, quartz glass, and LiTaO3. In general, two wafers are brought into contact at room temperature (~25ºC) and followed by thermal treatment processes (>100ºC) enabling reliable bonding strength to withstand subsequent mechanical grinding or polishing processes. During thermal treatments, the major concern in dissimilar bonded wafer pairs is the thermal stress originating from a mismatch in thermal expansion coefficients. Higher thermal stresses above a critical temperature may cause sliding, debonding, cracking or misfit dislocation between two bonded wafers. It is therefore highly desirable to predict the critical temperatures and optimize the thermal steps for dissimilar bonded wafer pairs with various materials and thicknesses. In this paper, a thermal stress model is developed based on analytical as well as finite element methods. To ensure a good bonding, the thermal stress should be smaller than the critical yield stress of the bonded materials. Meanwhile, the deformation energy should be lower than the bonding energy so that no sliding or debonding occurs during the thermal treatments. Under these two conditions, the critical temperatures for various dissimilar bonded wafer pairs (Si/GaAs, Si/Quartz and Si/LiTaO3) are calculated and predicted. The effects of wafer thickness are also demonstrated. To verify our calculation results, 100-mm silicon wafers are combined to LiTaO3 wafers by plasma activated bonding process. The bonded wafer pairs are heated at different temperatures to strengthen bonding. Experimental results show the critical temperature value is in agreement with our calculation. We believe our model provides a tool to optimize the thermal treatment processes during the dissimilar wafer bonding. It has great potentials to improve the bonding processes for wafer-level hybrid integration.

Process Simulation of Kovar-Glass-Silicon Bonding for Micromachined Combustor

High Temperature Sealing Of Kovar-Glass-Silicon For Power Mems Application

Process Development of A New Tgv Interposer for Wafer Level Package of Inertial Mems Device

Universal Fixture for Assembling and Testing of a Silicon-Based Microcombustor

Processes-based Multistep Simulation of Thermal- mechanical Reliability of a 3D-TSV MEMS

Design and Numerical Simulation of a Micro-Gas Turbine Combustor

Physical Simulation of Interfacial Microstructure Evolution for Hot Compression Bonding Behavior in Linear Friction Welded Joints of GH4169 Superalloy

Simulation of R.F window Brazing process: Thermal-Structural analysis of ceramic to metal vacuum brazing joints

Numerical simulation of preheating fuel gas combustion in micro-scale tube

From Surface Activation to Microfluidic Heat Pipes: an Innovative In-Situ Wafer Level Heterogenous Bonding Method

Fabrication of Si3N4 micro-components by a combined microfabrication process

Development and performace evaluation of a combustor with silicon carbide microchannel cooling

Mechanical investigation of glass ceramic brazed ceramic and steel composites

2D Computational Fluid Dynamics Simulation Analysis of the Assembly of Low‐Temperature Cofired Ceramics/Low‐Temperature Cofired Ceramics and Si/Si Sandwiches by Reactive Bonding

Numerical Simulation of Micro-Combustion for Different Heat Loss Conditions

Investigation of Thermal Treatment Processes for Dissimilar Wafer Bonding

Monte Carlo Simulations of Gas Flow and Heat Transfer in Vacuum Packaged MEMS Devices

Combustion Characteristics of Sinusoidal-Shaped Walls with Catalyst Segmentation in Micro-Combustors for Micro-Thermophotovoltaic Application

Design and Fabrication of a Silicon-Based Micro Combustor for Micro Gas Turbine Engine

Fabrication of Si<sub>3</sub>N<sub>4</sub> Micro-Components by a Combined Microfabrication Process

Heat transfer analysis of a tube-in-tube steam reformer for the application of MGT-SOFC hybrid process