Abstract:ABSTRACTQuenching is often an essential step in heat treatment of steels for enhancing strength. Water quenching which is low cost and free of pollution risk instead of oil quenching or polymer aqueous solution quenching which is high cost and has high pollution risk will be widely used in heat treatment enterprises. However, the problem of easy cracking of low alloy steels (especially medium carbon low alloy steels) quenched in water has long been a concern for many researchers. The finite element simulation (FES) is used to predict transient stress at cracking position during quenching of an AISI 4140 steel cylinder sample and found that the transient tangential tensile stress at cracking position was only 350 MPa which is smaller than half of the yield strength (775 MPa) of AISI 4140 steel. Such a low tensile stress causing quenching cracking is surprising. To ascertain the underline reasons, a phase-field finite element (PFFE) model is established to investigate the microscopic stress distribution produced by martensitic transformation. The results indicate that the microscopic stress at the junction of the lath martensitic variants in AISI 4140 steel exceeded 800 MPa, and thus such a high microscopic stress is considered as the origin of quenching cracking. By using two examples, our work further clarifies the basic principle of the water–air alternative timed quenching (ATQ) process invented by us as a process suitable for engineering applications with the ability to avoid water quenching cracking and ensure mechanical properties.

Compound Interrupted Water Quenching Techniques of Large Plastic Mould Steel Block

Simulation Analysis of Thermal Stress During Casting Process of Large-Sized Alloy Steel Ingot

Process simulation, optimized technology and computer controlled quenching

Research and Application of Digital Timed Quenching Process and Equipment

Design of Quenching Process for Large-sized AISI P20 Steel Block Used As Plastic Die

Numerical Simulation on Quenching Process of Large-sized Plastic Mould Made of Steel 718

Development and Application of Alternate Timed Quenching by Water and Air

Numerical Simulation on Quenching Process of Large Die Block of 718 Steel

The Process Design of Water Quenching Based on Finite Element Simulation and Its Applications

Numerical Simulation of Water Air Alternative Quenching Process for Large Steel Forging

Numerical Simulation on Temperature and Microstructure During Quenching Process of Large-sized AISI P20 Steel Die Blocks

Cooling System of Hot Stamping of Quenchable Steel BR1500HS: Optimization and Manufacturing Methods

Development And Application Of Multicycle Quenching-Partitioning-Tempering Process

Water Quenching Cracking Mechanism and Prevention of Steels

Simulation Trends in Quenching Technology for Automotive Components

Development of Multi-Cycle Quenching–partitioning–tempering Process and Its Applications in Engineering

Timed Quenching Process for Large-Scale AISI 4140 Steel Shaft

Numerical Simulation of Quenching of Large Sized Blocks of 718 Steel Used for Plastic Dies

Water-controlled quenching heat treatment method of 42CrMo bars

Quenching process for 42 CrMo steel large diameter and long shaft

Quenched Depth of 20mnsi Steel Bar in the Process of Controlled-Cooling