Abstract:ABSTRACTQuenching is often an essential step in heat treatment of steels for enhancing strength. Water quenching which is low cost and free of pollution risk instead of oil quenching or polymer aqueous solution quenching which is high cost and has high pollution risk will be widely used in heat treatment enterprises. However, the problem of easy cracking of low alloy steels (especially medium carbon low alloy steels) quenched in water has long been a concern for many researchers. The finite element simulation (FES) is used to predict transient stress at cracking position during quenching of an AISI 4140 steel cylinder sample and found that the transient tangential tensile stress at cracking position was only 350 MPa which is smaller than half of the yield strength (775 MPa) of AISI 4140 steel. Such a low tensile stress causing quenching cracking is surprising. To ascertain the underline reasons, a phase-field finite element (PFFE) model is established to investigate the microscopic stress distribution produced by martensitic transformation. The results indicate that the microscopic stress at the junction of the lath martensitic variants in AISI 4140 steel exceeded 800 MPa, and thus such a high microscopic stress is considered as the origin of quenching cracking. By using two examples, our work further clarifies the basic principle of the water–air alternative timed quenching (ATQ) process invented by us as a process suitable for engineering applications with the ability to avoid water quenching cracking and ensure mechanical properties.

Research and Application of Digital Timed Quenching Process and Equipment

Development and Application of Alternate Timed Quenching by Water and Air

Development and Advances in Cryogenic Treatment Technique and Device

The Process Design of Water Quenching Based on Finite Element Simulation and Its Applications

Timed Quenching Process for Large-Scale AISI 4140 Steel Shaft

Process simulation, optimized technology and computer controlled quenching

Development And Application Of Multicycle Quenching-Partitioning-Tempering Process

Compound Interrupted Water Quenching Techniques of Large Plastic Mould Steel Block

Development of Multi-Cycle Quenching–partitioning–tempering Process and Its Applications in Engineering

Numerical Simulation of Water Air Alternative Quenching Process for Large Steel Forging

Design of Quenching Process for Large-sized AISI P20 Steel Block Used As Plastic Die

Numerical Simulation on Temperature and Microstructure During Quenching Process of Large-sized AISI P20 Steel Die Blocks

Water Quenching Cracking Mechanism and Prevention of Steels

Quenching process for 42 CrMo steel large diameter and long shaft

Simulation Trends in Quenching Technology for Automotive Components

Enhancing mechanical properties and avoiding cracking by simulation of the quenching process of connecting rods

Development and Application of Thermo-mechanical Control Process Involving Ultra-fast Cooling Technology in China

Investigation of quenching stress of 42CrMo treated by alternately timed quenching process

Status of quenching technology and standard research

Enhancing Mechanical Properties and Avoiding Cracks by Simulation of Quenching Connecting Rods

Application of the Computer-Aided Quenching Technology on the Connecting Bar of 42Crmo4