Abstract:To increase the power rating and improve the reliability of the single-phase power supply system, the input-parallel output-parallel (IPOP) single-phase dc/ac converters (SDACs) are widely used. However, among the IPOP SDACs, there are complicated circulating currents which will increase the current stress on the switching devices and influence the safe operation of the system. But, the detailed quantitative analysis of the circulating currents is not well developed and the corresponding suppression strategies are not very comprehensive. Focusing on these problems, this paper pays attention to the detailed mathematic model and effective suppression strategy of circulating currents among IPOP SDACs. First, the detailed mathematic model of the circulating currents is established. Based on this model, it is found that there are various types of circulating currents existing in the IPOP SDACs, including circulating currents within the single SDAC and circulating currents among the multiple SDACs. At the same time, the influence factors are also analyzed, and it is first revealed that the asymmetry of impedances in different sides will cause circulating currents with different frequencies components including the dc, fundamental, and second frequencies. Second, after the detailed analysis, a decentralized control method composed of the common mode (CM) and differential mode (DM) control is proposed to suppress the complicated circulating currents. The control method is comprehensive and can suppress circulating currents caused by diverse influence factors. All the theoretical analyses are verified by the real-time hardware-in-loop (HIL) tests.

Research On Technique Of Noise Suppressing In A Mixed System With Both Analog And Digital Circuits

A New Noise Removed Method Based on Noise Concept

Analysis of Noises and Method of Reducing the Noises in Optoelectronic Detectors

Substrate noise suppression method analysis of integrated circuit

A Novel Discrete Multi-Point Active Cancellation Circuit for Substrate Noise Reduction of Mixed-Signal IC

Noise Analysis and Parameter Optimization of Digital MEMS Accelerometer System

New Method for Suppressing Noise Based on Different Gain Amplifier Signal Fusion

Suppressing Method of Common-Mode Noise in MHz 380V-12V DCX Converter

Analysis and Suppression of Common-Mode EMI Noise in 1 MHz 380 V-12 V DCX Converter with Low NFoM Devices

Noise Suppression Method for Improvement of Power Quality Using Wavelet Transforms

Design of Low Noise Processing Technology Based on Digital Domain

Methodology to Determine Dominant Noise Source in a System-on-chip Based Implantable Device

Research of Noise Suppression for CMOS Image Sensor

High Performance Analog & Digital Mixed-Signal and DSP Control Systems Design for Reduced EMI

Decentralized Suppression Strategy of Circulating Currents among IPOP Single-Phase DC/AC Converters

Study on the Low-frequency Sound Detection

New Noise-Tolerant Dynamic Circuit Design

Research On The Readout Noise Suppression Method For Digital Correlated Double Sampling

Noise suppressing techniques used for on-line monitoring of partial discharge in large generators

METHODS OF NOISE SUPPRESSION FOR ON-LINE MONITORING PARTIAL DISCHARGE IN TRANSFORMERS

Active noise reduction analysis and experimental research on electromagnetic vibration noise of transformer