Abstract:The hot deformation behaviors of TA15 titanium alloy were investigated by isothermal compression experiments on Gleeble-3500 thermal simulation machine. The results indicate that the flow stress curves of TA15 titanium alloy in the two-phase region are dynamic recrystallization (DRX) type while in the β single-phase region are main dynamic recovery (DRV) type. The evolution of microstructure and substructure (grain boundary misorientation and dislocation) under different process parameters were studied by using electron backscattered diffraction (EBSD) and transmission electron microscopy (TEM). Microstructure analysis shows that a large number of recrystallized α grains and martensite α′ phase appear as the strain rate decreases under the condition of two-phase region. However, lath martensite microstructure is replaced by lamellar martensite microstructure at low strain rate in β single-phase region. Grain boundary misorientation analysis indicates that low angle boundaries (LABs) transform into high angle boundaries (HABs) sufficiently by reducing strain rate or increasing deformation temperature. Texture evolution analysis shows that the degree of preferred orientation after deformation weakens and the intensity of texture decreases with strain rate increasing in the two-phase region. However, more potential slip systems are activated in the β single-phase region. TEM analysis suggests that microscopic deformation bands with high density of parallel arrangement dislocations evolve into subboundaries or boundaries. As the deformation continues, dislocations are accumulated around the subboundaries, and they promote the transformation of subgrains with LABs into new grains with HABs.

Damage Characteristics and Fracture Morphology of Commercial Pure TA2

Instability Analysis and Rate-Dependent Failure Criteria for Adiabatic Shear Band Propagation of Ti-6al-4v

Microstructural Evolution in the Adiabatic Shear Bands of Predeformation Ta2

Analysis of Adiabatic Shearing Phenomenon and Dynamic Mechanical Performance on TA-6 of α-Titanium Alloy

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Investigations on Microstructure Evolution of TA1 Titanium Alloy Subjected to Electromagnetic Impact Loading

Dynamic Deformation Behavior and Fracture Characteristics of a near α TA31 Titanium Alloy at High Strain Rates

Fracture Behaviors of Commercially Pure Titanium under Biaxial Tension: Experiment and Modeling

Dynamic Shear Fracture Toughness and Failure Characteristics of Ti–6Al–4V Alloy under High Loading Rates

Effect of Α Phase Morphologies on Shear Localization Behavior of Tc4 Titanium Alloy at High Strain Rate

Experimental Study on Pure Titanium Subjected to Different Combined Tension and Torsion Deformation Processes

Adiabatic shear instability in a titanium alloy: Extreme deformation-induced phase transformation, nanotwinning, and grain refinement

Effect of High Strain Rate on Adiabatic Shearing of α+β Dual-Phase Ti Alloy

The Effects of Microstructure on the Dynamic Mechanical Response and Adiabatic Shearing Behaviors of a Near-α Ti-6Al-3Nb-2Zr-1Mo Alloy

Microscopic Mechanisms Underlying the Dynamic Tensile Behaviors of a Commercially Pure Titanium at Elevated Temperatures

Study on High-Temperature Flow Behavior and Substructure and Texture Evolution of TA15 Titanium Alloy

High-temperature “Inverse” Hall-Petch relationship and fracture behavior of TA15 alloy

Multiple Deformation Mechanisms in Adiabatic Shear Bands of a Titanium Alloy during High Strain Rate Deformation

In-Situ SEM Study on Deformation and Failure Mechanism of TC4 Titanium Alloy by Laser Additive Manufacturing

Experimental analysis of the multiaxial failure stress locus of commercially pure titanium at low and high rates of strain

Experimental Study on Quasi-Static Tensile Mechanical Properties of TC11 Titanium Alloy at Room Temperature