Abstract:Fabrication of miniaturized titanium thin-walled products directly using sheet metals is proven to be a promising approach with high productivity. In this process, however, there are many unknowns in terms of size effect and its affected fracture behavior. This study is thus aimed at investigating the effect of grain size on the fracture behavior of commercially pure titanium (CP-Ti) sheets with a thickness of 0.1 mm. Tensile tests combined with a digital image correlation (DIC) measurement system were conducted to determine the critical fracture stress of the specimens with different grain sizes. The fracture morphologies of the stretched specimens were further characterized by a scanning electron microscope (SEM). According to the experimental observation, an evident transition from ductile to brittle fracture as the grain size increases from 33.1 to 107.7 mu m is revealed. Macroscopically, the elongation and critical fracture stress decrease with the increase of grain size. While according to the microscopic observations, the number of dimples decreases with the increase of grain size. Meanwhile the cleavage planes and river patterns gradually appear in the coarse grain fracture surface. To explore the fracture mechanism, transmission electron microscope (TEM) observations were made utilizing the specimens with fine and coarse grains. Significant dislocation emission from crack-tips was revealed at different grain sizes. Moreover, evident dislocation pile-up at grain boundaries was observed in the specimen with a grain size of 33.1 mu m. Those intense dislocations reduce the effective stress at the crack tip resulting in higher crack propagation resistance. Nevertheless, the dislocation density at crack-tip decreases strongly with the increase of grain size leading to high crack-tip effective stress and less crack plasticity. Thus cleavage fracture was dominated in coarse grain CP-Ti sheets. A dislocation shielding model was developed to capture the dislocation observation in various grain sizes. The critical stress onset of CP-Ti sheets fracture during the tensile test was also predicted for validation.

Fracture Behaviors of Commercially Pure Titanium under Biaxial Tension: Experiment and Modeling

Experimental Study on Pure Titanium Subjected to Different Combined Tension and Torsion Deformation Processes

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

Research on Microstructure Deformation Mechanism of Crack Tip in Titanium under Tension along Different Orientations

Fracture Mechanism of Electrically-Assisted Micro-Tension in Nanostructured Titanium Using Synchrotron Radiation X-Ray Tomography

Experimental Study on Pure Titanium During the Positive-Torsion and Positive-Negative-torsion

Atomic simulation of the orientation effects on crack tip behavior in titanium single crystal

Tensile Fracture Characteristics Along Different Directions Of Laminated Ti-Tibw/Ti Composites With Two-Scale Hierarchical Structures Fabricated By Reaction Hot Pressing

Effect of grain size on the ductile-brittle fracture behavior of commercially pure titanium sheet metals

The Role of Biaxial Stress Ratio on the Mechanical Behavior and Deformation Mechanisms in HCP Α-Ti

Simulation of Intergranular Ductile Cracking in Β Titanium Alloys Based on a Micro-Mechanical Damage Model.

Unusual plastic deformation and damage features in Titanium: experimental tests and constitutive modeling

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Experimental analysis of the multiaxial failure stress locus of commercially pure titanium at low and high rates of strain

Coupled effect of stress state and strain rate on ductile fracture of Ti6Al4V alloy

Plastic Deformation Mechanism and Slip Transmission Behavior of Commercially Pure Ti during In Situ Tensile Deformation

Microscopic Mechanisms Underlying the Dynamic Tensile Behaviors of a Commercially Pure Titanium at Elevated Temperatures

Study on mixed-mode fracture behavior of TC4 titanium alloy

The Action Mechanism of Rolling Texture on the Anisotropic Behavior of a Pure Titanium Plate

Fatigue Crack Growth Behavior of CP-Ti Cruciform Specimens with Mixed Mode I-II Crack under Biaxial Loading

Molecular Dynamics Simulation of Crack Growth in Pure Titanium under Uniaxial Tension