Abstract:Due to their special appearance, spherical α‐Al2O3 nanoparticles play an important role for obtaining high performance structural and functional ceramics. However, there are still problems such as easily agglomerates to form worm‐like structures at high temperatures and difficult availability of spherical nanoparticles. In this study, spherical α‐Al2O3 nanoparticles with high dispersion were prepared by combination of microwave hydrothermal method and addition of nano‐Al particles as seeds. Firstly, spherical amorphous alumina precursors were synthetized by microwave hydrothermal method at 100°C for 30 min using Al2(SO4)3∙18H2O, Al(NO3)3∙9H2O and urea as raw materials, and then, spherical α‐Al2O3 nanoparticles with diameter of about 66 nm were acquired after calcined the precursor at 1050°C for 90 min by adding nano‐Al seeds, which reduced the calcination temperature by 50°C and holding time by 30 min compared to that without seeds. Kinetic analysis shows that 5 wt.% nano‐Al seeds can reduce the activation energy of crystalline transition of γ‐Al2O3 to α‐Al2O3 from 516.51 kJ/mol to 474.37 kJ/mol. Moreover, the microscopic mechanism of nano‐Al particles as seeds was investigated. The characterizations of sintering properties show that spherical α‐Al2O3 nanoparticles facilitate the acquisition of uniform microstructure for resulting ceramic and the fracture modes include both intergranular and transgranular fracture.This article is protected by copyright. All rights reserved

Preparation of spherular ultrafine α-Al2O3 powder by hydrolysis of alkoxide combining instant calcination

Synthesis of Nano-Alumina Hydroxide Sol Using Sol-gel Method

Preparation of Ultrafine Α-Al2o3 Powder by Homogenous Precipitation

STUDIES ON THE PREPARATION OF ALUMINUM-OXIDE (HYDROUS) ULTRAFINE PARTICLES BY THE METHOD OF MICROEMULSION REACTION

Preparation of submicron spherical alumina powder by high-pressure hydrolysis of aluminum isopropoxide

A Simple Procedure to Prepare Spherical Α-Alumina Powders

PREPARATION AND CHARACTERIZATION OF ALUMINA NANOCRYSTALLINE POWDER BY COMPLEXING SOL-GEL METHOD

Preparation of Ultrafine Α-Al2o3 Powders by Catalytic Sintering of Ammonium Aluminum Carbonate Hydroxide at Low Temperature

The Preparation of Aluminum Hydroxide from High-Alumina Gangue Desilication Residues Based on Soda Lime Sintering Method

Synthesis of Nanosized Pseudoboehmite and γ-Al2O3 by Control Precipitation Method

Preparation of High Pure and Micron-Sized α-Al2O3 Powder by Activated Aluminium Hydrolysis Method

Preparation of nanosized CoAl2O4 powders by sol–gel and sol–gel-hydrothermal methods

Preparation of Ultrafine Α -Al 2 O 3 Using Precipitation-Azeotropic Distillation Method

Preparation and Characterizations of Porous Γ-Al2o3 Nanoparticles

Synthesis of α-Al2O3 nanoparticles with uniform size distribution by stearic acid-assisted mechanochemical method

Preparation of spherical α‐Al 2 O 3 nanoparticles by microwave hydrothermal synthesis and addition of nano‐Al seeds

Synthesis of Nanosized Pseudoboehmite and γ-Al<sub>2</sub>O<sub>3</sub> by Control Precipitation Method

Preparation and Characterization of Nanocrystalline Gamma-Al2o3 by Sol-Gel Process

Preparation of nanoscale alpha-Al2O3 powders by the polyacrylamide gel method

Influence of heat treatment conditions on the size and morphology of nano gamma-Al2O3 powders

Microreactor-assisted Synthesis of Α-Alumina Nanoparticles