Abstract:Preparation of biological scaffolds with complex shapes and controllable internal structures is a significant development direction for the tissue engineering field. Due to its simplicity, low-cost and cost-effectiveness, fused deposition molding (FDM) is one of the most popular 3D printing technologies. In this paper, polyvinyl alcohol/polylactic acid/hydroxyapatite composites were fabricated successfully. On this basis, composite scaffolds with different pore structures were designed and constructed by using FDM technology. The material structure was characterized by scanning electron microscopy (SEM) and dynamic thermomechanical analyzer. The results showed that the cross-sectional morphology of the system presented a "sea-island" structure. The introduction of PLA and HA significantly increased the modulus of the material, which was beneficial to achieve its FDM processing. The compressibility, mineralization behavior, and biocompatibility of the viscoelastic characteristics to natural cartilage subjected to the condition of filling angle of 45° was systemically invesitgated. Notably, the concentrations of Ca2+ and PO43− in simulated body fluid were reduced by 34.7% and 58.2% on 8th day, indicating a good bone formation and mineralization ability, which was further corroborated by SEM and fourier-transform infrared spectroscopy (FTIR) results. Biotoxicity test showed that the scaffold presented excellent biocompatibility.

Preparation of porous composite scaffold for tissue engineering by means of solvent self-eiffusion process

Preparation and characterization of nano-hydroxyapatite/silk fibroin porous scaffolds.

Study on molding technology optimization of preparing porous poly(L-lactic acid)/β-tricalcium phosphate composite scaffold materials

Preparation of PLLA/β-TCP compound porous scaffoldby using NH_4HCO_3 as porogen

Fabrication and characterization of composite porous scaffold of β-tricalcium phosphate / poly(lactic acid)

Solvent-assisted room-temperature compression molding approach to fabricate porous scaffolds for tissue engineering.

Preparation of Poly(l-Lactic Acid)/β-Tricalcium Phosphate Scaffold for Bone Tissue Engineering Without Organic Solvent

Preparation of Porous Poly(Lactic Acid)/Tricalcium Phosphate Composite Scaffolds for Tissue Engineering

Preparation and Analysis of Porous PAN/CS/BCP/PLGA Composite Scaffolds

Studies on the porous scaffold made of the nano-HA/PA66 composite

Preparation and Properties of Biodegradable Polyurethane Scaffolds for Tissue Engineering

Porous polymeric structures for tissue engineering prepared by a coagulation, compression moulding and salt leaching technique

Porous Morphology, Porosity, Mechanical Properties Of Poly(Alpha-Hydroxy Acid)-Tricalcium Phosphate Composite Scaffolds Fabricated By Low-Temperature Deposition

Preparation of Nano-Hydroxyapatite/Polyamide6 Composite Porous Scaffold for Bone Tissue Engineering

Improved Biocompatibility of Novel Poly(l-Lactic Acid)/β-Tricalcium Phosphate Scaffolds Prepared by an Organic Solvent-Free Method.

Preparation of Highly Porous Interconnected Poly(Lactic Acid) Scaffolds Based on A Novel Dynamic Elongational Flow Procedure

Effect of solvent on porous PLA/HA scaffolds preparation using novel solid H2O2 porogen

Preparation and performance of poly (vinyl alcohol)/polylactic acid/hydroxyapatite composite scaffolds based on 3D printing

Preparation and Characterization of Porous PCL-CS Composite Scaffolds

Preparation and properties of chitosan/tricalcium phosphate composite scaffolds

The Preparation and Characterization of Porous Scaffold Made of Nano-Hydroxyapatite/Chitosan/Polyamide 66 Composite