Abstract:This paper presents the mixing behaviors of binary particle mixtures with equal diameter and different density within a spouted bed by three-dimensional coupled computational fluid dynamics (CFD) and discrete element method (DEM).The particle motion is modeled by the DEM, and the gas motion is modeled by the k−ε two equation turbulent model. The numerical computation is based on a cylindrical spouted bed which the inside diameter, height and conical base are 200mm, 700mm, and 60°, respectively. Binary particle mixtures are composed of spherical particles with equal diameter of 4mm and the heavy-over-light density ratio ranges from 1 to 4. The mixing process, evaluation of mixing quality, particle circulation and distribution of particle concentration along both radial and axial directions are obtained on the basis of simulations. The mixing process is illustrated by the development of solid flow patterns with time. The results show that the process of particle mixing mainly contains three stages: macro-mixing stage, micro-mixing stage and stable mixing stage. The mixing quality is described by Lacy mixing index, and is evaluated by two parameters: mixing degree at the mixing equilibrium phase and the time required reaching the steady value. The effect of sample size act on the mixing degree is also investigated and an optimum size is found. The results show that the mixing quality increases with increasing of gas velocity and decreases with increasing particle density differences of the binary mixture. By comparing the typical trajectories for two tracer particles with different densities, the mixing mechanism is further analyzed. Besides, the mixing rate in radial and axial directions is characterized by the time required for the concentration of the mixtures constituent to maintain a basic equilibrium. It is found that the mixing process along the axial direction is slower than that of the radial direction, and in both directions, mixture with smaller component density difference shows a higher mixing rate and better mixing uniformity.

A Numerical Investigation on Axial/Lateral Mixing in Fluidized Beds

Quantitative Evaluation of Micro-mixing Processes in Fluidized Beds

Discrete element method simulation of the mixing process of particles with and without cohesive interparticle forces in a fluidized bed

Numerical Simulation of the Characteristics of Particle Flows in an Internally Circulating Fluidized Bed

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

Investigation of mixing behaviors in a spouted bed with different density particles using discrete element method

Numerical Study on Thermal Characteristics in Fluidized Beds Using Dem-Cfd

DEM Simulation of Mixing Behaviors of Binary Particles With Different Sizes in Spouted Beds

DEM simulation of particle mixing in flat-bottom spout-fluid bed

Investigation Of Solid Mixing Mechanisms In A Bubbling Fluidized Bed Using A Demucfd Approach

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Numerical Study of Particle Injection into a Gas-Solid Fluidized Bed

Experimental Quantification of the Lateral Mixing of Binary Solids in Bubbling Fluidized Beds

A Numerical Study on Gas-Fluidized Beds of Wet Flexible Fibers

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

Convection-diffusion model for solids mixing in the bubbling fluidized beds

Solids mixing in fluidized beds

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

Discrete Particle Simulation and Visualized Research of the Gas−Solid Flow in an Internally Circulating Fluidized Bed

Effect of Bed Thickness on the Segregation Behavior of Particle Mixtures in a Gas Fluidized Bed

Numerical simulation of local and global mixing/segregation characteristics in a gas–solid fluidized bed