Abstract:The solid properties are of significant influence on the thermal performance of the fluidized bed. In order to provide valuable information for the application of this equipment, a numerical study is carried to clarify the effects of solid properties on the heat transfer characteristics in a lab-scale fluidized bed by means of the CFD-DEM method. Specially, two aeration conditions, i.e. the same superficial velocity and the same fluidization number, are considered. The results show that the violent convective mechanism at bed bottom plays a significant role in the heating of the bed material. The entrainment of rising bubbles and hence solid mixing are the key factors to get better temperature uniformity of the bed during the heating process. With the decrease of particle density and size, the internal circulation of solid phase is strengthened under the same superficial velocity, while slightly weakened under the same fluidization number. Obvious resemblance can be captured between solid mixing and temperature uniformity, and the enhanced solid mixing usually leads to homogeneous temperature distribution of the bed. It can be found that the heating rate decreases with increasing solid density regardless of aeration setup. In addition, it is positively related to particle diameter under the same fluidization number, while keep unchanged under the same superficial velocity. Furthermore, enhanced solid mixing and better temperature uniformity can be captured with increasing solid heat capacity, which confirms that gas temperature shows considerable effect on gas-solid flow. (C) 2020 Published by Elsevier B.V. on behalf of The Society of Powder Technology Japan. All rights reserved.

Investigation Of Solid Mixing Mechanisms In A Bubbling Fluidized Bed Using A Demucfd Approach

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Dynamic Modelling of Fluidisation in Gas-Solid Bubbling Fluidised Beds

Multi-scale Characteristics and Gas-Solid Interaction among Multiple Beds in a Dual Circulating Fluidized Bed Reactor System

Bubble Size “bimodal” Distribution Enhances Mixing and Mass Transfer in Slurry Bubbling Column Reactor

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

Particle-Scale Simulation of Solid Mixing Characteristics of Binary Particles in a Bubbling Fluidized Bed

LES–DEM Investigation of the Solid Transportation Mechanism in a 3-D Bubbling Fluidized Bed. Part II: Solid Dispersion and Circulation Properties

Investigation of Gas-Solid Flow Dynamics and Heat Transfer in Fluidized Beds by Using DEM-LES Coupling Approach

Discrete Element Study of Solid Mixing Behavior with Temperature Difference in Three-Dimensional Bubbling Fluidized Bed

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

Convection-diffusion model for solids mixing in the bubbling fluidized beds

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

The research of gas-solid fluidized bed bubbling behavior based on CFD-DEM coupled simulation

Numerical simulation of local and global mixing/segregation characteristics in a gas–solid fluidized bed

Effect of Cohesive Particle Addition on Bubbling Characteristics of Gas-Solid Fluidized Bed: Meso-scale Mechanism

A Numerical Investigation on Axial/Lateral Mixing in Fluidized Beds

CFD-DEM Study of the Effects of Solid Properties and Aeration Conditions on Heat Transfer in Fluidized Bed

A Microscopic Study on the Mixing Process of Binary Solids in Bubbling Fluidized Bed

Solids mixing in fluidized beds