Abstract:The gas-solid flow in a fluidized bed is modelled by a combined approach of discrete particle method and computational fluid dynamics (DPM-CFD), in which the motion of individual particles is obtained by solving Newton's second law of motion and gas flow by the Navier-Stokes equation based on the concept of local average. The coupling between DPM and CFD is achieved directly by applying the principle of Newton's third law of motion to the discrete particle and continuum gas which are modelled at different length and time scales. The equations of motion for a system of particles are solved by a collision dynamic model developed in this work which, in conjunction with the predictor-corrector method, allows stiff particles (K = 50,000 Nm(-1)) to be used with a reasonable computational time step (1.5 x 10(-5) s) while conserving the energy and momentum. The gas-phase equations are solved by the conventional SIMPLE method facilitated with the Crank-Nicolson scheme to give the second order accuracy in the time discretization.The proposed model shows its capacity of simulating the gas fluidization process realistically from a fixed to fully fluidized bed via an incipient fluidization stage. This is done by a series of numerical tests to reproduce the experimental procedures in determining the minimum fluidization velocity of 2400 particles (rho(p) = 2700 kg m(-3), D = 4 x 10(-3) m) in a pseudo-three-dimensional central jet fluidized bed of dimensions 0.9 x 0.15 x 0.004 m. The hysteretic feature of bed pressure drop vs superficial gas velocity curve is obtained for the first time realistically from first principles, with the predicted minimum fluidization velocity in good agreement with experiment. It is demonstrated that the proposed model is able to capture the gas-solid flow features in a fluidized bed from the largest length and time scales relevant to the processing equipment down to the smallest ones relevant to the individual particles. (C) 1997 Elsevier Science Ltd.

Numerical Simulation of the Characteristics of Particle Flows in an Internally Circulating Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Direct Numerical Simulation on Particles Flow in the Internally Circulating Fluidized Bed

Numerical Study on Thermal Characteristics in Fluidized Beds Using Dem-Cfd

Discrete Particle Simulation and Visualized Research of the Gas−Solid Flow in an Internally Circulating Fluidized Bed

Discrete particle simulation and visualized research of the gas-solid flow in an internally circulating fluidized bed

Numerical Simulation Of The Gas-Solid Flow In An Internally Circulating Fluidized Bed With A Dem- Cfd Model

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

Numerical Simulation of Two-Dimensional Spouted Bed with Draft Plates by Discrete Element Method

LES-DEM Investigation of Gas–solid Flow Dynamics in an Internally Circulating Fluidized Bed

Numerical investigation of the particle flow behaviors in a fluidized-bed drum by CFD-DEM

Discrete Element Method Simulation of Cylinder-Shaped Particle Flow in a Gas-Solid Fluidized Bed

Direct Particle Simulation of Flow Characteristics in Bubbling Fluidized Bed

Computational Fluid Dynamics-Discrete Element Method Investigation of Solid Mixing Characteristics in an Internally Circulating Fluidized Bed

A Numerical Investigation on Axial/Lateral Mixing in Fluidized Beds

Discrete Particle Simulation of the Gas-Solid Flow in a Circulating Fluidized Bed

Numerical study of solids behavior in fluidized bed with multi-immersed tubes

CFD–DEM Study of Mixing and Dispersion Behaviors of Solid Phase in a Bubbling Fluidized Bed

Numerical Simulation of the Gas-Solid Flow in a Fluidized Bed by Combining Discrete Particle Method with Computational Fluid Dynamics

Simulation of the Lateral Movement on Particles Under Continuous Feeding and Discharging in a CFB Dense Zone

Numerical Study on Liquid-Solid Flow Characteristics in Inverse Circulating Fluidized Beds