Abstract:In order to study the hydroforming simulation process of variable cross-section shaped tubular automobile longitudinal arm and the influence law of key factors on its forming quality, and to provide guidance for its engineering application. Firstly, the numerical simulation and experimental analysis of hydroforming are carried out on variable diameter tube with similar characteristics to the longitudinal arm hydroforming, and the correctness of the built finite element model and numerical simulation method is verified through experiments. Then, according to the structural characteristics of the automobile longitudinal arm parts, determine the longitudinal arm hydroforming process and the main molding parameters, and analyze the molding process by numerical simulation. According to the simulation results, the effects of hydroforming initial internal pressure, initial feeding, friction coefficient and shaping pressure on the wall thickness characteristics and shaping rules of the longitudinal arm are investigated, and the hydraulic expansion test of automobile longitudinal arm is carried out on the basis of the optimal loading path obtained. The results show that: in the case that the initial internal pressure does not reach the cracking pressure, the initial internal pressure and initial axial feeding has a greater impact on the wall thickness of the automobile longitudinal arm, reduce the friction coefficient can improve the material flow performance, improve the uniformity of the wall thickness of the parts, and appropriately increase the shaping pressure can improve the dimensional accuracy of the longitudinal arm molding and the molding quality. It is verified by experimental comparison that the whole process of automobile longitudinal arm forming simulation based on bending-hydraulic forming has high feasibility, and a relatively good loading path can be obtained to provide reference for practical engineering applications.

Research and FEM Simulation on the Hydroforming for Rear Axle Housing of Light Vehicle

Analysis and Design of Hydroforming Process for Automobile Rear Axle Housing by Fem

FEM Analysis of Tube Preforming and Hydroforming Process for an Automotive Part

Numerical simulation and experimental research on hydro-bulging of automobile drive axle housing

Numerical Simulation Research on Hydroforming Process of Automobile Front Transom

Rigid–plastic finite element analysis of hydroforming process and its applications

Analysis and design of hydroforming process for automobile lower arm by FEM

Research on the hydroforming law of variable cross-section shaped tubular automobile longitudinal arm

Finite-Element Analysis on Lightweight Material of Drive Axle Housing

Rear Axle Housing Analysis Based on Simulation of Dynamic Vehicle Model

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

Preform design in hydroforming of automobile lower arm by FEM

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Application of Forming Simulation of Automobile Covering Parts

A study on formability analysis and technological design of outer panels for rear wheel housing on a vehicle

Research on Hydroforming Tubular Part with Large Perimeter Difference

FINITE ELEMENT SIMULATION AND TEST FOR FATIGUE LIFE OF COMMERCIAL VEHICLE DRIVING AXLE HOUSING

Hydroforming of Aluminum Tubular Parts with Different Diameter

Hydroforming Processes and Equipments of Hollow Structures with Various Sections

Prediction of forming limit in the hydroforming processes by using FEM and fracture criterion

A Study on Numerical Simulation of Hydroforming of Aluminum Alloy Tube