Abstract:In order to study the hydroforming simulation process of variable cross-section shaped tubular automobile longitudinal arm and the influence law of key factors on its forming quality, and to provide guidance for its engineering application. Firstly, the numerical simulation and experimental analysis of hydroforming are carried out on variable diameter tube with similar characteristics to the longitudinal arm hydroforming, and the correctness of the built finite element model and numerical simulation method is verified through experiments. Then, according to the structural characteristics of the automobile longitudinal arm parts, determine the longitudinal arm hydroforming process and the main molding parameters, and analyze the molding process by numerical simulation. According to the simulation results, the effects of hydroforming initial internal pressure, initial feeding, friction coefficient and shaping pressure on the wall thickness characteristics and shaping rules of the longitudinal arm are investigated, and the hydraulic expansion test of automobile longitudinal arm is carried out on the basis of the optimal loading path obtained. The results show that: in the case that the initial internal pressure does not reach the cracking pressure, the initial internal pressure and initial axial feeding has a greater impact on the wall thickness of the automobile longitudinal arm, reduce the friction coefficient can improve the material flow performance, improve the uniformity of the wall thickness of the parts, and appropriately increase the shaping pressure can improve the dimensional accuracy of the longitudinal arm molding and the molding quality. It is verified by experimental comparison that the whole process of automobile longitudinal arm forming simulation based on bending-hydraulic forming has high feasibility, and a relatively good loading path can be obtained to provide reference for practical engineering applications.

Rigid–plastic finite element analysis of hydroforming process and its applications

Analysis and Design of Hydroforming Processes by the Rigid–plastic Finite Element Method

Rigid-plastic finite element method and its implementation in the hydroforming processes

Analysis and Design of Hydroforming Process for Automobile Rear Axle Housing by Fem

Analysis and design of hydroforming process for automobile lower arm by FEM

Preform design in hydroforming of automobile lower arm by FEM

Finite element analysis of hydroforming process for sheet metal pairs

Prediction of forming limit in the hydroforming processes by using FEM and fracture criterion

Simulation and Analysis of UOE Pipe Production Processing by Three-Dimensional Finite Element Method

ELASTIC-PLASTIC ANALYSIS OF 3D SOLIDS USING THE FINITE PARTICLE METHOD

Analysis and experiment on tube hydroforming in a rectangular cross-sectional die

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Manufacture of an Automobile Lower Arm by Hydroforming

Research on the hydroforming law of variable cross-section shaped tubular automobile longitudinal arm

Finite Element Analysis and Design in Stainless Steel Sheet Forming and Its Experimental Comparison

Research on Bending Forming Method of Large Diameter-Thickness Ratio Thin-Walled Tubes for Aerospace

Finite Element Analysis of Roll Forming using Roll Flowers with Different Bending Shapes

Influence of Process Parameters on Thinning Ratio and Fittability of Bellows Hydroforming

Structural analysis of plate-type hydroforming hydraulic press

Application and development of algorithm for sheet hydro-forming in numerical simulation

Real-Time Simulation of Tube Hydroforming by Integrating Finite-Element Method and Machine Learning