Abstract:Reference electrodes which demonstrate long-term potential stability are essential for many continuous monitoring applications and are commonly based on Ag|AgCl electrodes; however, these electrodes are susceptible to poisoning from aqueous sulphide species which are commonly present in wastewater and natural groundwater. This work presents a sulphide resistant solid-state reference electrode (SSRE) based on a composite material using suspended KCl electrolyte and sacrificial AgCl in a cross-linked polyvinyl acetate polymer matrix. Sulphidation of the sacrificial AgCl produces a stable Ag 2 S precipitate and prevents further ingress of the poisoning sulphide species through the composite material. A novel SSRE using this material is compared to a control SSRE without suspended AgCl and a typical liquid filled reference electrode. These three reference electrodes are studied using electrochemical impedance spectroscopy (EIS), and their application is also studied in potentiometric pH sensing and cyclic voltammetry (CV). The long-term sulphide resistance of the two SSREs is also studied with potentiometry, and cross-sections of these electrodes were examined using micro X-ray fluorescence (μXRF). Both SSREs demonstrated higher impedance than the liquid reference electrode but were similar to other SSREs reported in the literature. This impedance did not result a meaningful difference in potentiometric pH sensing or CV experiments done using typical scan rates. The KCl/AgCl SSRE exhibited remarkable sulphide resistance, with all samples demonstrating a stable potential without maintenance after ca . 120 days of continuous immersion in 1 g L −1 Na 2 S solution, whereas KCl SSRE samples all demonstrated significant drift before this time. μXRF sulphur maps revealed that suspended AgCl prevented sulphide ingress, thus protecting the embedded Ag|AgCl electrode. This work presents a reference electrode that could enable long-term monitoring in challenging sulphide solutions, and also highlights a novel approach for preventing reference electrode poisoning which could be more widely explored.

Research on the performance of an Ag/AgCl solid reference electrode

Fabrication and characterization of planar reference electrode for on-chip electroanalysis

Long-Time Evaluation of Solid-State Composite Reference Electrodes

Influence of Double-Pulse Electrodeposition Parameters on the Performance of Ag/AgCl Electrochemical Electrode for Marine Electric Field

A sulphide resistant Ag|AgCl reference electrode for long-term monitoring

Evaluating and Developing a Reliable Reference Electrode for Choline Chloride Based Deep Eutectic Solvents

A New Electroplated Ir/Ir（OH） X Ph Electrode and Its Application in the Coastal Areas of Newport Harbor, California

Construction and Evaluation of Cheap and Robust Miniature Ag/AgCl Reference Electrodes for Aqueous and Organic Electrolytes

All-Solid Ultralow Noise Electric Field Sensor Based on the Sol Adhesion Method for Telluric and Marine Electrode Field Detection

The Optimization of Ag/Ag2s Electrode Using Carrier Electroplating of Nano Silver Particles and Its Preliminary Application to Offshore Kueishan Tao, Taiwan

The Development of a Stable and Practical Saturated Reference Electrode for Molten Chloride Salt Systems

Electrochemical Synthesis and Performance of AgCl/Ag/Sliver Mesh Collector Composite Electrode for Seawater Batteries

Design and Fabrication of an Ultra-low Noise Ag-AgCl Electrode

Experimental study on influencing factors of contact resistance on electroosmotic consolidation

Long-Term Performance of Ag/AgCl Reference Electrodes for Corrosion Potential Monitoring in Radioactive Tank Waste at the Hanford Site

An electroplated Ag/AgCl quasi-reference electrode based on CMOS top-metal for electrochemical sensing

Electro-osmotic strengthening of silts based on selected electrode materials

Experimental study on electrical characteristics of ions in concrete at early age under electric field

AC impedance of Ag/AgCl reference electrodes for use in disposable biosensors

Preparation and Performance Characterization of Novel Solid Ph Sensing Electrodes

ExperimentaI research on chIoride migration reguIarity around steeI-bar during eIectrochemicaI chIoride extraction for reinforced concrete