Abstract:The strain rate-dependent behavior of a unidirectional non-crimp fabric (UD-NCF) carbon fiber/snap-cure epoxy composite loaded along the transverse direction under quasi-static and dynamic conditions was characterized. Transverse tension and compression tests at quasi-static and intermediate strain rates were performed using hydraulic testing machines, while a split Hopkinson pressure bar (SHPB) apparatus was used for transverse compression tests at high strain rates. A pulse shaper was used on the SHPB apparatus to ensure dynamic equilibrium was achieved and that the test specimens deformed homogenously with a nearly constant strain rate. The transverse tensile strength at a strain rate of 16 s−1 increased by 16% when compared to that at quasi-static strain rates, while distinct localized fracture surface morphology was observed for specimens tested at different strain rates. The transverse compressive yield stress and strength at a strain rate of 325 s−1 increased by 94% and 96%, respectively, when compared to those at quasi-static strain rates. The initial fracture plane orientation for the transverse compression tests was captured with high-speed cameras and found to increase with increasing strain rate. The study provides an important data set for the strain rate-dependent response of a UD-NCF composite material, while the qualitative fracture surface observations provide a deeper understanding of the failure characteristics.

The Effect of Braid Angle on the Dynamic Response of 3-D Four Direction Carbon/Epoxy Braid Composites at High Strain Rates

An Investigation of the Dynamic Behavior of 3-D Four Direction Carbon-Fibers/epoxy Braid Composites at Various Strain Rates

High-strain Rate Compressive Behavior of CFRP Confined Concrete: Large Diameter SHPB Tests

Compressive Behavior of Engineered Cementitious Composites under High Strain-Rate Loading

High strain rate behavior and failure mechanism of three-dimensional five-directional carbon/phenolic braided composites under transverse compression

Dynamic properties and strain rate effect of 3D angle-interlock carbon/epoxy woven composites

High strain rate impact effect and failure behavior of 3D six-directional braided composites

Longitudinal compressive behavior and failure mechanism of three-dimensional five-directional carbon/phenolic braided composites at high strain rates

Influence of Braiding Parameters on the Dynamic Compressive Properties and Failure Mechanism of 3D Braided Composites

X-ray microtomography analysis of the damage mechanisms in 3D circular braided carbon fiber/epoxy resin composite tubes under axial impact compression

Impact Compressive Character of Balanced Angle-Ply Carbon/Epoxy Composites

Experimental Investigation on Compressive Properties for 3d Four-Directional Braided Composites

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Compressive Failure of Carbon/Epoxy Laminate Composites under High Impact Loading

Dynamic Compressive Response and Failure Behaviour of CFRP Composites at High Strain Rates

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite

Effects of loading rate and loading direction on the compressive failure behavior of a 2D triaxially braided composite

Split Hopkinson pressure bar testing of 3D multi-axial warp knitted carbon/epoxy composites

Thermo-mechanical response of 3D braided composites with different braiding angles under high strain rate punch shear loading

Effects of temperature and strain rate on impact compression behaviors of three-dimensional carbon fiber/epoxy braided composites

Effect of Braiding Architectures on the Mechanical and Failure Behavior of 3D Braided Composites: Experimental Investigation