Abstract:Theoretical and experimental studies on the compressive mechanical behavior of 4-harness satin weave carbon/epoxy composite laminates under in-plane loading are conducted over the temperature range of 298–473 K and the strain rate range of 0.001–1700/s in this article. The stress–strain curves of 4-harness satin weave composites are obtained at different strain rates and temperatures, and key mechanical properties of the material are determined. The deformation mechanism and failure morphology of the samples are observed and analyzed by scanning electron microscope (SEM) micrographs. The results show that the uniaxial compressive mechanical properties of 4-harness satin weave composites are strongly dependent on the temperature but are weakly sensitive to strain rate. The peak stress and elastic modulus of the material have the trend of decrease with the increasing of temperature, and the decreasing trend can be expressed as the functional relationship of temperature shift factor. In addition, SEM observations show that the quasi-static failure mode of 4-harness satin weave composites is shear failure along the diagonal lines of the specimens, while the dynamic failure modes of the material are multiple delaminations and longitudinal splitting, and with the increasing of temperature, its longitudinal splitting is more serious, but the delamination is relatively reduced. A constitutive model with thermomechanical coupling effects is proposed based on the experimental results and the increment theory of elastic–plastic mechanics. The experimental verification and numerical analysis show that the model is shown to be able to predict the finite deformation behavior of 4-harness satin weave composites over a wide range of temperatures.

Dynamic properties and strain rate effect of 3D angle-interlock carbon/epoxy woven composites

Effect of Strain Rate on the Mechanical Properties of Carbon/epoxy Composites under Quasi-Static and Dynamic Loadings

Experimental Study of In-plane Mechanical Properties of Carbon Fibre Woven Composite at Different Strain Rates

Experimental Investigations on the In-Plane Dynamic Compressive Behavior and Upper Limit of Constant Strain Rate for 2D Twill Weave Carbon Fiber Reinforced Composite

An Investigation of the Dynamic Behavior of 3-D Four Direction Carbon-Fibers/epoxy Braid Composites at Various Strain Rates

Experiment study on the strain rate behavior of carbon/epoxy composite materials

Experimental Study Of In-Plane Mechanical Performance Of Carbon/Glass Hybrid Woven Composite At Different Strain Rates

High strain rate behavior and failure mechanism of three-dimensional five-directional carbon/phenolic braided composites under transverse compression

Compressive Failure of Carbon/Epoxy Laminate Composites under High Impact Loading

Effect of Strain Rate on the Transverse Tension and Compression Behavior of a Unidirectional Non-Crimp Fabric Carbon Fiber/Snap-Cure Epoxy Composite

The compressive and tensile behavior of a 0/90 C fiber woven composite at high strain rates

Longitudinal compressive behavior and failure mechanism of three-dimensional five-directional carbon/phenolic braided composites at high strain rates

Modeling and Testing Strain Rate-Dependent Tensile Strength of Carbon/Epoxy Composites

Experimental Investigation and Modeling of Dynamic Thermomechanical Behavior of 4-Harness Satin Weave Carbon/epoxy Composites

High-Velocity Impact of Carbon/Epoxy Composite Laminates

Experimental Study on the Compressive Properties of A Kind of Carbon/Epoxy Composite

Strain Rate-Dependent Compressive Properties of C/C Composites

High-Strain-Rate Compression Behavior and Failure Mechanism of 3d Mwk Carbon/Epoxy Composites

The Effect of Braid Angle on the Dynamic Response of 3-D Four Direction Carbon/Epoxy Braid Composites at High Strain Rates

Strain Rate and Temperature Effect on Mechanical Properties and Failure of 3D Needle-Punched Carbon/Carbon Composites under Dynamic Loading