Abstract:Natural graphite, commonly used in energy storage applications such as the battery industry, is marked as a supply-risk material due to the elevated demand and limited resources. The synthetic graphite process is inefficient, so there is a highly required for alternative methods of making graphite as anode material. In this study, we report two efficient methods for catalytic graphitization of coal using high-temperature heating and flash Joule heating (FJH). Using both methods, the structure and morphology characterizations have demonstrated the successful structural conversion of coal from an amorphous structure into a crystalline structure. When the obtained graphitized coal samples via the high-temperature heating method (HTC) and via the FJH method (FHC) were used as anodes for lithium-ion batteries (LIBs) and potassium-ion batteries (PIBs), the HTC and FHC presented outstanding rate capability and remarkable stable cycling performance. The HTC and FHC anodes delivered initial charge capacities of 322.5 and 321.3 mAh·g −1 , respectively, at a current density of 0.1 C. for LIBs. When used as anodes in PIBs, the HTC and FHC delivered initial charge capacities of 265.4 and 262.2 mAh·g −1 at 0.1 C current density. These results make the HTC and FHC promising materials for developing energy storage applications. Therefore, this work exploited the low price of coal and its abundant reserves, combined with the FJH technique, which is an effective method for saving energy and time, to produce high-quality graphitized coal materials, which can make this process green and economically attractive.

The charge-discharge properties of carbon materials prepared from coal for the anode of lithium ion batteries

Study on Carbon Prepared from Coal As Anode for Lithium Ion Battery

Study on Carbon Nanoparticles for Anode Materials of Lithium-Ion Battery

Insights into the carbonization mechanism of bituminous coal-derived carbon materials for lithium-ion and sodium-ion batteries

Electrochemical Lithium Insertion Properties of Carbon Nanotubes Produced by Catalytic Pyrolysis of Acetylene

Surface Modifications of Carbon Materials Used As Anode of Lithium Ion BatteryⅡ.The Carbon Material with Core Shell Structure and Its Positive Effect on Cell Performance of Graphite Anode

Graphitization Mechanisms and Electrochemical Performance of Needle Coke Anode for Li-ion Battery

In Situ Nitrogen-Doped Helical Mesoporous Carbonaceous Nanotubes for Superior-High Lithium Anodic Performance

Preparation and Lithium Insertion Performance of Mesocarbon Microbeads

Coal-derived Synthetic Graphite with High Specific Capacity and Excellent Cyclic Stability As Anode Material for Lithium-Ion Batteries

Coal-Based Semicoke-Derived Carbon Anode Materials with Tunable Microcrystalline Structure for Fast Lithium-Ion Storage

Highly graphitized coal tar pitch-derived porous carbon as high-performance lithium storage materials.

Preparation and lithium storage of anthracite-based graphite anode materials

Coal-based hierarchical porous carbon for lithium/potassium storage

Carbon-coated Si-Cu/graphite Composite As Anode Material for Lithium-ion Batteries

Carbon Electrode Materials for Lithium-Ion Batteries

Hard Carbon Derived from Coal Tar Pitch for Use as the Anode Material in Lithium Ion Batteries

Preparation of Graphitized Taixi Coal and Its Electrochemical Properties

A comparison of the electrochemical performance of graphitized coal prepared by high-temperature heating and flash Joule heating as an anode material for lithium and potassium ion batteries

Preparation, Structure, and Electrochemical Performance of Anodes from Artificial Graphite Scrap for Lithium Ion Batteries

Improving the Performance of Biomass-Derived Carbons in Li-Ion Batteries by Controlling the Lithium Insertion Process