Abstract:2,3,4,5,6-Pentafluoro and 4-trifluoromethyl 2,3,5,6-tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T(g)s) of the copolymers were found positively deviated from the Gordon-Taylor equation. The positive deviation could be accounted for by dipole-dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T-g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one-third of that for pure PMMA. The fluorinated styrenes-MMA copolymers were thermally stable up to 420 degrees C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 degrees C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with non-fluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. (C) 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 4938-4942, 2010

Synthesis and Charaterization of Crosslinkable Poly(MMA-co-GMA) and Its Application in Arrayed Waveguide Grating

Fabricated Technology for Polymer/si Arrayed Waveguide Grating

Polymeric Flat Focal Field Arrayed Waveguide Grating Using Electron-Beam Direct Writing

Birefringence compensated arrayed waveguide grating

Design and Optimization of an Athermal Asymmetric All-Polymer Arrayed Waveguide Grating

Polymeric 1×32 arrayed waveguide grating multiplexer using cross-linkable fluorinated poly (ether ether ketone) at 1550nm

Silica-Based Arrayed Waveguide Grating With Flattened Spectral Response Using A Multimode Interference Coupler

Athermal Silicon Arrayed Waveguide Grating With Polymer-Filled Slot Structure

Design and Fabrication of a Polymeric Flat Focal Field Arrayed Waveguide Grating.

Design and fabrication of arrayed waveguide grating using fluoropolymer PFS-co-GMA

Optimization of Polymer-Arrayed Waveguide Grating Multiplexer

Optimization and fabrication of a polymeric arrayed-waveguide grating multiplexer

Design and fabrication of 1 × 32 silica-based arrayed waveguide grating

A NEW POLYMER MATERIAL FOR CLADDING LAYER IN EO MODULATORS

Polymer-waveguide Bragg-grating Devices Fabricated Using Phase-mask Lithography

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

Thermo-optically tunable arrayed-waveguide-grating made of polymer/Si

Effect of reactive ion etching process on simulation of polymeric arrayed waveguide grating multiplexers

Improvement of the physical properties of poly(methyl methacrylate) by copolymerization with N -pentafluorophenyl maleimide; zero-orientational and photoelastic birefringence polymers with high glass transition temperatures

Simulation and design for an arrayed-waveguide grating made of flourinated polymers

Copolymers of methyl methacrylate with N‐trifluorophenyl maleimides: High glass transition temperature and low birefringence polymers