Abstract:LiCoO2 is the most common cathode material for commercial lithium-ion batteries due to its high tap density, excellent cycling performance and high rate capability. Though LiCoO2 has a theoretical capacity of 274 mAh/g, its reversible capacity is limited to around 140 mAh/g when cycled between 3.0 V and 4.2 V vs Li metal. Increasing the upper cutoff voltage can extract more lithium ions beyond Li0.5CoO2, which can increase the reversible capacity of LiCoO2. However, the electrolyte will be oxidized at such high voltage, which will consume the electrolyte, and form solid electrolyte interphase (SEI) on the surface. The thickness, stability will influence the electrochemical performance of LiCoO2cathode at high voltage. In this work, we used atomic force microscope (AFM) to study the properties and evolution of SEI films on LiCoO2 cathode during electrochemical cycling. Different structure and evolution processes of SEI on different crystal faces //(001) and „¨(001) were observed in-situ during the electrochemical reaction. We also study the protecting effect of a thin layer of Al2O3 film on the surface of LiCoO2micro-crystal prepared by atomic layer deposition (ALD) technique. Figure. (a) LiCoO2 micro-crystal prepared by melting-salt method. (b) LiCoO2 micro-crystal embedded in Al substrate. Topography images of LiCoO2 micro-crystal //(001) face obtained in-situ by AFM at original (c) and charged to 4.5 V (d). Topography images of LiCoO2 micro-crystal „¨(001) face obtained in-situ by AFM at original (e) and charged to 4.5 V (f).

Electrochemical Performance of Nano-Sio2 Modified LiCoO2 Thin Films Fabricated by Electrostatic Spray Deposition (ESD)

Enhanced Electrochemical Performance of LiNi0.8Co0.15Al0.05O2 Cathode Material via Li2TiO3 Nanoparticles Coating

Enhanced electrochemical performance of Li 1.2 Mn 0.54 Ni 0.13 Co 0.13 O 2 cathode material coated with Li + -conductive Li 2 SiO 3 for lithium ion batteries

Nanostructure and Its Effect on Electrochemical Properties of Polyanionic Li2CoSiO4 for Lithium Ion Batteries

Nano-SiO2 Doped Lithium Cobalt Oxide Thin Film as A Novel Electrode Material

Nanostructure and its effect on electrochemical properties of polyanionic Li 2 CoSiO 4 for lithium ion batteries

Enhanced Interfacial Kinetics and High Rate Performance of LiCoO2 Thin-Film Electrodes by Al Doping and in Situ Al2O3 Coating.

Electrostatic Spray Deposition of Nanoporous Coo/Co Composite Thin Films As Anode Materials for Lithium-Ion Batteries

An investigation of silicon-doped LiCoO2 as cathode in lithium-ion secondary batteries

Effect of Lithia and Substrate on the Electrochemical Performance of A Lithia/Cobalt Oxide Composite Thin-Film Anode

Physical and Electrochemical Characterization of LiCo0.8M0.2O2 (m=ni,zr) Cathode Films for All-solid-state Rechargeable Thin-film Lithium Batteries

LiCoPO4-based ternary composite thin-film electrode for lithium secondary battery

Synthesis and electrochemical behavior of nanophase LiCoO2

All-Solid-State Thin Film Lithium Batteries With Licoo2 Cathodes

Fabrication of multi-shell coated silicon nanoparticles via in-situ electroless deposition as high performance anodes for lithium ion batteries

Improving rate capacity and cycling performance of lithium-rich high-Mn Li-1.8[Mn0.7Co0.15Ni0.15]O-2.675 cathode materials by Li2SiO3 coating

Relationships Between the Crystal/interfacial Properties and Electrochemical Performance of LiNi0.33Co0.33Mn0.33O2 in the Voltage Window of 2.5–4.6V

Nano-Cuo Coated Licoo2: Synthesis, Improved Cycling Stability and Good Performance at High Rates

Nanoscale Control and Tri-Element Co-Doping of 4.6 V LiCoO2 with Excellent Rate Capability and Long-Cycling Stability for Lithium-Ion Batteries.

In-Situ Observation of Solid Electrolyte Interphase on LiCoO2 During Cycling to 4.5 V by AFM

Electrochemical behaviour of surface modified SiO2-coated LiNiO2 cathode materials for rechargeable lithium-ion batteries