Abstract:The liquid-phase, catalytic oxidation of toluene with air in a continuous stirred tank reactor has become the main technology for producing benzoic acid. Designs are aimed at obtaining high product conversion rates but the reaction is strongly exothermic and therefore it is also important to maintain stable operation to guarantee product quality. However, there is currently no suitable process simulation model available for study. In this paper, a mathematical model of the reaction system is established and validated by comparison to literature data. Steady-state variables were calculated for a series of the operating conditions, using the homotopy continuation method, revealing the existence of multiple steady-state solutions. Two steady-state solutions were found for each operating condition, which had different conversion rates and sensitivities to changes in operating conditions. The operating point having the highest conversion rate was the most sensitive to changes in operating conditions, thus requiring a superior control system. A trade off must be carried out between conversion rate and production stability. Consequently, in practice, a number of factors must be considered simultaneously to select a compromise design.

Simulation of Suspension Catalytic Distillation Column for Alkylation of Benzene with C12 Olefins

Simulation and Optimization of Linear Alkylbenzenes Distillation Process

Kinetic Model and Simulation Analysis for Toluene Disproportionation and C9-Aromatics Transalkylation

Simulation, sensitivity analysis and optimization of a continuous catalytic reforming process

Modeling, Simulation and Optimization of Commercial Naphtha Catalytic Reforming Process

Modeling and Simulation Research onm-Xylene Oxidation Reactor

Simulation of Fluidized Bed Reactor for Methanol to Olefins(MTO)Process

Lumped Kinetics Model and Its On-Line Application to Commercial Catalytic Naphtha Reforming Process

Modeling and Simulation of Commercial Catalytic Reformers

Nonequilibrium model and parameter estimation on three-phase distillation in a packed column

Research on Rigorous Mechanism Modeling for Distillation Column Series under Wide Variation of Feed Condition

Non-equilibrium Stage Model of Catalytic Distillation for Cumene Synthesis Using Low Concentration Propylene and Benzene

MODELING OF BATCH DISTILLATION STARTING FROM COLD STATE

Simulation of Catalytic Distillation Process for Cumene Synthesis

Development of simulation software of the number of theoretical plates in a continuous distillation column

Kinetic Model of Olefins/Isobutane Alkylation Using Sulfuric Acid as Catalyst

Study on Hydrolysis of Methyl Acetate in A Catalytic Distillation Column

Modeling, simulation and analysis of the liquid-phase catalytic oxidation of toluene

Large-scale Equation Oriented Dynamic Simulation of Ethylene Separation Columns

Thermodynamic analysis and azeotropic distillation simulation for acetic acid-water-butyl acetate system

Compartmental modeling and solving of large-scale distillation columns under variable operating conditions