Abstract:Thin films of zinc sulfide (ZnS) with varying thicknesses have been successfully fabricated using radio frequency magnetron sputtering on glass substrates at a temperature of 300 K. Structural analysis via X-ray diffraction and selected area electron diffraction confirmed the presence of nanocrystalline cubic ZnS phases in the films. The crystallite size, determined from X-ray diffraction lines, ranged between 42 and 55 nm. We also explored the morphological attributes of these surfaces and observed significant changes in both grain shape and size. Our atomic force microscopy analyses revealed that the thinner film displayed a topography marked by thinner, elongated rough peaks. As the film thickness increased, these rough peaks gradually transformed into wider, flatter features. Additionally, the films exhibited distinct percolation properties, which were undeniably tied to the alterations in the shape and size of the ZnS grains on their surfaces. Thinner samples demonstrated more pronounced surface percolation (FS > 0.5) compared to thicker samples, which displayed reduced surface percolation. Furthermore, we noted that the 250 nm film predominantly showcased strongly multifractal 3D spatial patterns in contrast to the other films. Spectroscopic measurements in the UV–visible-near infrared region revealed high transparency across the 350–850 nm spectra, with a noticeable blue shift in the absorption edge. Calculations yielded direct allowed band gaps within the range of 3.69–3.85 eV. These results indicate that the optical properties of films can be tailored by their structural and morphological characteristics, thereby offering valuable guidance for their appropriate applications.

The Optical Properties of ZnS Dependent on Different Fabricating Process

ZnS fabricated by spark plasma sintering and its properties

Surface Pattern and Optical Properties of In-doped ZnO Thin Films by Hydrothermal Method

Transparent Nanostructured ZnS films by Low Temperature Sputtering for Flexbile Optoelectronic Devices

Multi-phonon interaction of ZnS material based on two-dimensional correlation analysis

Micromorphologies and Defects in CVD ZnS and ZnSe

The Optical Properties of Nano-particles ZnS

Structural, morphological, and optical bandgap properties of ZnS thin films: a case study on thickness dependence

Preparation of ZnS Nanofibers Via Electrospinning

Fabrication of an Anti-Reflective Microstructure on ZnS by Femtosecond Laser Bessel Beams

Preparation and Protection of ZnS Surface Sub-Wavelength Structure for Infrared Window

Studies of synthesis and optical properties of ZnS nanocrystals

Optical and Electrical Properties of S Doped ZnO Thin Films

Optical Properties of Sub-30 Nm-Thick ZnS Films Studied by Spectroscopic Ellipsometry

Measurement Method for High-Temperature Infrared Optical Constants of ZnS Crystal Materials in a Multi-Layer Structure

[Preparation and transmissivity of ZnS nanocolumn thin films with glancing angle deposition technology]

Structural and Optical Properties of ZnSO Alloy Thin Films with Different S Contents Grown by Pulsed Laser Deposition

Preparation and optical properties of ZnO/ZnS heterostructured nanomaterials

Tunable Synthesis of 3d Zns Architectures and the Optical Properties

Enhancing crystalline/optical quality and electrical properties of the Co-doped ZnS thin films a comparative study

Optical Properties of Zn Fine Particles Coated with ZnO And/or ZnS