Abstract:As the most basic interconnection metallic material, copper (Cu) has been widely used in giant-large scale integrated circuits (GLSI). Corrosion inhibitors always play a crucial role in the Cu chemical mechanical polishing (CMP) process. The passivation of hydrogen peroxide (H2O2) alone is too weak to adequately protect against chemical corrosion on the surface of Cu film, thus, it is necessary to add corrosion inhibitors to the slurry. As a representative corrosion inhibitor, 1, 2, 4-triazole was compared with a novel corrosion inhibitor known as TT-LYK (ethanol, 2, 2′-[[(methyl-1H-benzotriazol-1-yl) methyl] imino] bis-), and their mixed inhibitor was studied in this paper. Different analytical methods such as the potentiodynamic polarization test, physical appearance phenomenon analysis, contact angle measurement and dynamic polishing experiment were used to compare their inhibition properties, and the fitting of different adsorption isotherms and static erosion tests were used to clarify the adsorption types and passivation processes respectively. The results indicated that both TT-LYK and 1, 2, 4-triazole achieved the goal of inhibiting Cu surface corrosion, but the inhibition effect of TT-LYK was slightly weaker at the same mass fraction. The corrosion protection of the two inhibitors is mainly attributable to the presence of organic inhibitor molecules on the surface of Cu by chemisorption and physisorption simultaneously. The passivation processes of both can be divided into two steps. First, the direct growth of the Cu-inhibitor passivation film occurs, followed by the redeposition of the Cu-inhibitor complex. From the results of electrochemical experiments, it can be concluded that the structure of the thin passivation film growing on the Cu surface varies with the inhibitor, and the composition of the passivation film was investigated by XPS and Raman spectrum analysis. At the same time, the surface roughness after polishing was found to decrease with the increase in inhibition effect of the inhibitors. According to the inhibition characteristics of these two inhibitors, a mixed corrosion inhibitor (TT-LYK and 1, 2, 4-triazole) was proposed in this study. Under the synergistic inhibition action, better inhibition effect and surface quality for Cu CMP were obtained. This outcome may be ascribed to the variation in the structure and density of the passivation film.

Inhibition effects of PMA/SbBr3 complex inhibitor on copper and copper-nickel alloy in LiBr solutions

Influence of Ni Addition on Corrosion Performance of Medium-temperature Filler Metal with Low Cu Content for Al Brazed Joints

Corrosion inhibition effect of benzimidazole and two derivatives on copper in alkaline environments: experimental and theoretical analyses

Electrochemical Studies of Polyaspartic Acid and Sodium Tungstate As Corrosion Inhibitors for Brass and Cu30Ni Alloy in Simulated Cooled Water Solutions

The Complex of PASP and Tungstate As Inhibitors of Cupronickel B10′s Corrosion in 3% NaCl Solution

Effect of APMImBr ionic liquid on the migration of silver in copper electrorefining

Long-term protective mechanism of poly(N-methylaniline)/phosphate one-step electropolymerized coatings for copper in 3.5% NaCl solution

Surface-enhanced Raman Scattering and Cyclic Voltammetry Studies of Synergetic Effects in the Corrosion Inhibition of Copper by Polybenzimidazole and Mercaptobenzimidazole at High Temperature

INHIBITION EFFECT OF LITHIUM NITRATE ON CARBON STEEL CORROSION IN HIGH CONCENTRATION LITHIUM BROMIDE SOLUTION AT 173°C

Investigation of Corrosion Inhibitor Adsorption on Mica and Mild Steel Using Electrochemical Atomic Force Microscopy and Molecular Simulations

Mechanisms of Mixed Corrosion Inhibitors in Copper Chemical Mechanical Polishing

The Effect of Complexing Agent on Electroless Nickel Sulphamate Coating on Brass Alloy: Structure Characteristics & Corrosion Behavior

SYNERGISTIC EFFECT OF CORROSION INHIBITION ON BRONZE BY BENZOTRIAZOLE AND SODIUM MOLYBDATE

Experimental and computational study of a multi-active-site Schiff base as corrosion inhibitor of mild steel in 1M HCl

Study on the film forming mechanism, corrosion inhibition effect and synergistic action of two different inhibitors on copper surface chemical mechanical polishing for GLSI

Inhibition effect of lithium salts on the corrosion of AA1100 aluminium alloy in ordinary Portland cement pastes

Ambient-stable polyethyleneimine functionalized Ti3C2T nanohybrid corrosion inhibitor for copper in alkaline electrolyte

Inhibitory effects of 1-butylpyridin-1-ium bromide in 0.1 M sulphamic acid for mild steel

Experimental and Computational Investigation of Salicylhydroxamic Acid as a Corrosion Inhibitor for Copper in Alkaline Solutions

Corrosive behavior of carbon steel in high temperature and high concentration lithium bromide solution

Inhibition Effect of 1-vinyl-3-ethylimidazolium Bromide for X65 Steel in 0.5 M Sulfuric Acid Solution