Abstract:The preparation of monolithic silica aerogels via non-supercritical drying is realized by the following procedures: (1) formation of silica alcogels with perfect network structure by controlling two-step hydrolysis and condensation reaction rates of tetraethoxysilane; (2) improvement and reinforcement of network structure and strength of silica gels through exchanging the pore fluid with ethanol solvent thoroughly, immersing of gels in the ethanol solutions of tetraethyoxysilane and aging; (3) gradual drying under ethanol fluid whose surface tension is much lower than water under ambient pressure. The resulting aerogels were characterized by means of SEM, TEM, TG-DTA, XRD, and adsorption-desorption techniques. It is found that the aerogels, which are made up of uniform spherical nanoparticles with diameters of about 10 nm, are of coherent network structures. Furthermore, the aerogels are porous, and the porosity is as high as 91%. The diameter of the pore sizes is in the range of 10 similar to 30 nm, and the density of the aerogels is low (200 similar to 400 kg . m(-3)). The specific surface area of the aerogels can be as high as 625. 65 m(2) . g(-1). The appearance, microstructure, diameters of primary particles and pore size distributions of the aerogels are in concordance with those prepared by conventional supercritical drying. It is demonstrated that the quality of the resulting aerogels is affected by the preparation conditions adopted in the preparation process. In fact, by adjusting the proportions of the reaction systems, and controlling the adding amounts of acid and base during the two-step hydrolysis and condensation process, silica aerogels with required density, definite strength and ideal morphology can be produced.

EFFECT OF PREPARATION CONDITIONS ON STRUCTURE AND PROPERTIES OF HYDROPHOBIC SiO2 AEROGEL

Preparation and characterization of hydrophobic SiO; aerogel

Preparation and Characterization of Hydrophobic SiO_2 Aerogel

Preparation and Hydrophobic Modification of SiO; Aerogels

Preparation and Hydrophobic Modification of SiO_2 Aerogels

Preparation of hydrophobic SiO2 aerogel from waterglass at ambient drying

Preparation of Silica Aerogels Via Non-supercritical Drying and Their Formation Process

Preparation of Hydrophobic Silica Aerogels from Industrial Water Glass

Hydrophobie SiO2 aerogels prepared with polyethoxydisiloxanes

Hydrophobic SiO2 Aerogels Prepared with Polyethoxydisiloxanes

Preparation and characterization of monolithic TiO2/SiO2 aerogels obtained by non-supercritical drying method

STRUCTURE AND PROPERTIES OF MONOLITHIC SILICA AEROGELS BY METHYLTRIMETHOXYSILANE

Preparation and properties of hydrophobic and highly transparent SiO 2 aerogels

SiO2 Aerogels Prepared with Ambient Pressure Drying and Its Properties

Preparation and Characterization of Hydrophobic Mesoporous SiO2 Aerogel

Effect of Surface Modification Agents on Hydrophobiic, Elastic and Thermal Property of Silica Aerogels Derived from Ambient Condition

Preparation of Hydrophobic SiO; Aerogels at Ambient Pre ssure

PREPARATION OF HYDROPHOBIC SiO2 AEROGEL AT LOWER COST

Preparation of Hydrophobic SiO2 Aerogels at Ambient Pressure

Preparation and Characterization of Hydrophobic Silica Aerogel by Ambient Pressure Drying Method

Effects of Preparation Conditions on Hydrophobic Silica Aerogels Via Ambient Pressure Drying