Abstract:The mechanical properties of the aluminum matrix composite directly affect its application in aerospace, transportation, and other industries. In this study, the effect of TiB 2 particles on the comprehensive properties which includes microstructure, thermal deformation behavior, tensile properties, fracture morphology and hardness of Al-Zn-Mg-Cu alloy was analyzed. Furthermore, the microstructures of these alloys were analyzed using energy-dispersive X-ray spectroscopy, X-ray diffraction, scanning electron microscopy, and a metallography microscope. The stress–strain curves and dynamic softening of the two alloys were studied using the thermal compression test. Furthermore, a thermal processing diagram was constructed for comparing the safety and instability processing zones of the alloys. The Vickers hardness test and the tensile test were performed to compare their hardness, tensile properties, and fracture morphologies. The results demonstrated that TiB 2 was contributing to the refinement of the grain size. When the deformation temperature and the stress–strain rate were 300–450 °C and 0.01–10 s −1 , the alloy exhibited the same stress-strain variation trend during the thermal compression process before and after adding TiB 2 particles. But the deformation resistance of the alloy was improved and processing instability zones were reduced from 300–320 °C/2.5–10 s −1 and 430–450 °C/0.2–0.5 s −1 to 420–450 °C/0.2–1 s −1 because of the addition of TiB 2 particles. TiB 2 particles could also increase the hardness of the alloy by 71.96% and improve the plastic properties and the fracture stress compared with before adding.

Thermodynamic Effect of Alloying Addition on In-Situ Reinforced TiB 2 /al Composites

Thermodynamics of the Effect of Alloying Additions on In-Situ Reaction to Synthesize TiC/Mg Composites

Ternary diffusion coefficients—Theoretical treatment and application to the In-situ -reinforced TiB 2 /Al composite

Thermodynamic Effects of Alloying Elements on Solid-State Interfacial Reactions in a Multicomponent System: Theoretical Treatment and Application in SiC f /Ti Composites

Ternary diffusion coefficients—Theoretical treatment and application to the <i>In-situ</i> -reinforced TiB<sub>2</sub>/Al composite

Thermodynamics and Kinetics to Alloying Addition on In-Situ AlN/Mg Composites Synthesis via Displacement Reactions in Liquid Mg Melt

Prediction of the Effect of Alloying Elements on in Situ Reaction in Synthesizing (aln+mg2si)/mg Composites

Prediction of the effect of alloying elements on in-situ reaction in synthesizing (AIN+Mg2Si)/Mg composites

Alloying Effect on the Stability of Ti5Si3 from First‐Principles Study

Effect of TiB2 addition on microstructure and fluidity of cast TiAl alloy

Alloying Design of Titanium Aluminum Intermetallics and Research Progress

In situ TiB2 particulate reinforced near eutectic Al–Si alloy composites

Promoting Strengthening and Grain Refinement of Aluminum Alloy During Wire and Arc Additive Manufacturing by Adding TiB2 Particles

Improving Microstructure and Mechanical Properties of Ti43Al5Nb0.1B Alloy by Addition of Fe

Mechanical Properties of In-Situ TiB2/A356 Composites

Effects of Mg, Si and Multiple Rare Earth Addition on Microstructures of Al<sub>3</sub>Ti /A356 Composites

Investigation on peripheral coarse grains and precipitation behavior of in-situ TiB2/Al–Cu–Mg composites with various Mg contents

Effect of TiB2 particles on thermal deformation behavior and mechanical properties of aluminum alloy

Microstructure and Mechanical Properties of In-Situ TiB 2 /A356 Composites and a Prediction Model of Yield Strength

Effects of Alloying Elements on Growth and Morphology of TiC in Arc-Melted TiC/Ti-6Al-4V Composites

Effects of alloy elements (Mg, Zn) on the microstructure and mechanical properties of (TiC+TiB2)/Al composites