Abstract:In this paper,the effects of utilizing an Er3+-doped fiber amplifier(EDFA) in analog optical links on the link characteristics,i.e.,noise figure and gain,are invesitgated,while a high-responsivity and high-saturation-power uni-traveling-carrier photodiode(UTC-PD) developed by ourselves is adopted as the optoelectronic conversion component to sustain high power operation.A great enhancement in the link gain is expected,without sacrificing the noise figure performance.The experiment is carried out to compare the performance of two links,one of which is composed of a laser diode(LD),a Mach-Zehnder modulator(MZM) and a photodiode(PD),while the other of which is composed of an LD,a MZM,an EDFA,an optical band-pass filter(OBPF) and a PD.The link performance is characterized based on the Y-factor method.When the LD output power is set to 17 dBm and the DC photocurrent of the PD is as high as 60 mA by utilizing an appropriate pump for the EDFA,the later link has demonstrated the lowest noise figure of 30.3 dB,which is 0.4 dB smaller than that of the former one without an EDFA.Meanwhile,the gain of the later link is as high as 15.5 dB,which is 41.3 dB larger than that of the former one.

Low-noise Figure C+L-band EDFA with a Preamplifier and an Improved Double-Pass L-band Amplifier

Experimental Realization of A Pbse Quantum Dot Doped Fiber Amplifier with Ultra-Bandwidth Characteristic

Performance Enhancement of C + L Band EDFA by Recycling the Residual Pump Lasers

Experimental study of two-stage erbium doped fiber amplifiers pumped by 980 nm and 1480nm LD

Ultra-Low Noise Figure in Optical Fiber Amplifier by Tailoring the Mode Field Profile of Erbium-Doped Fiber

Low noise characterization of gain-clamped erbium-doped fiber ring-lasing amplifiers

An Erbium-Doped Fiber Amplifier With Tunable Gain-Clamping in the Extended L-Band

Optimally Gain-Flattened and Dispersion-Managed C + L-band Hybrid Amplifier Using a Single-Wavelength Pump Laser

High gain and low noise O+E bands fiber amplification based on hybrid bismuth-doped fiber

Noise performance of erbium-doped fiber amplifier pumped at 1.49 mu m, and application to signal preamplification at 1.8 Gbit/s

A Novel 3-Stage Structure for a Low-Noise, High-Gain and Gain-Flattened L-band Erbium Doped Fiber Amplifier

High-efficiency cladding-pumped Er/Yb co-doped alumino-phosphosilicate fiber for an extended L-band amplification

Applications of High-Saturation-current Photodiode in the RoF Links with Low Noise Figure and High Gain

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

L-Band Edfa Efficiency Enhancement And Dynamic Range Extension By C-Band Laser Injection

High Gain, Low Noise, Spectral-Gain-Controlled, Broadband Lumped Fiber Raman Amplifier

Raman and erbium-doped fiber amplifiers hybrid bidirectional optical amplifier with low noise figure for fiber-optic radio frequency synchronization

A 28-nm E-band low noise amplifier with minimum 3.8 dB noise figure

High Signal-to-noise Ratio Linear Cavity Multiwavelength Erbium-Doped Fiber Laser with Two Intracavity Fiber Periodic Filters

Improving extended L-band fiber amplifiers using Er 3+ : Y 3+ co-doped silicate with optimized alumino-phospho-silicate glass matrix

Experimental Study on Polarization-Maintaining Erbium-Doped Fiber Amplifier