Abstract:The rotational performance of high-precision rolling bearings is fundamental to the overall accuracy of complex mechanical systems. A nano-level instrument to analyze rotational accuracy of high-precision bearings of machine tools under working conditions was developed. In this instrument, a high-precision (error motion < 0.15 mu m) and high-stiffness (2600 N axial loading capacity) aerostatic spindle was applied to spin the test bearing. Operating conditions could be simulated effectively because of the large axial loading capacity. An air-cylinder, controlled by a proportional pressure regulator, was applied to drive an air-bearing subjected to non-contact and precise loaded axial forces. The measurement results on axial loading and rotation constraint with five remaining degrees of freedom were completely unconstrained and uninfluenced by the instrument's structure. Dual capacity displacement sensors with 10 nm resolution were applied to measure the error motion of the spindle using a double-probe error separation method. This enabled the separation of the spindle's error motion from the measurement results of the test bearing which were measured using two orthogonal laser displacement sensors with 5 nm resolution. Finally, a Lissajous figure was used to evaluate the non-repetitive run-out (NRRO) of the bearing at different axial forces and speeds. The measurement results at various axial loadings and speeds showed the standard deviations of the measurements' repeatability and accuracy were less than 1% and 2%. Future studies will analyze the relationship between geometrical errors and NRRO, such as the ball diameter differences of and the geometrical errors in the grooves of rings. (C) 2013 AIP Publishing LLC.

Study of friction moment measurement system of small rolling bearing

Development on Friction Measurement System for Pneumatic Cylinders

Measurement and Technological Test on Grinding State Parameters of Bearing Ring Raceway

A Friction Evaluation Method Based on Barrel Compression Test

A New Approach to Measure the Friction Coefficient of Micro Journal Bearings

Analysis of Friction Moment of Gyroscope Frame Bearing

Theoretical calculation models and measurement of friction torque for rolling bearings: state of the art

Small load friction testing and measuring system

A novel small motor measurement system based on ultrasonic bearings

Study on Dynamics of Rolling Bearings

An Experimental Method for Measuring Friction Behaviors of Linear Rolling Guides

Estimation of Rolling Friction Coefficients in a Tribosystem Using Optical Measurements

Test and analysis of friction torque of double-row angular contact ball bearing under vacuum environment

Ultrasound Measurement of Lubricant-Film Thickness Distribution in Cylindrical Roller Bearings

Nano-Level Instrumentation For Analyzing The Dynamic Accuracy Of A Rolling Element Bearing

The Contact Behavior Analysis Between Microcomponents on a Low-Frequency Reciprocating-Fretting Ball-on-Flat Tribometer

Dimensional Discussion of Traction Force Vector on Ball/Raceway Interface and Study of Bearing Dynamic Behavior

Development of a Microtribology Measuring System Based on Virtual Instrument Technology

Measurement of Lubricant Film Thickness of Cylindrical Roller Bearing Using Ultrasound

Principle and Measure Point Research of Bearing Oil-film Force Identification

Measurement and Curve Fitting of the Friction Torque of Rolling Bearings Subjected to Radial Loads