Abstract:Direct torque control (DTC) is considered one of the simplest and fastest control strategies used in motor drives. However, it produces large torque and flux ripples. Replacing the conventional two-level hysteresis torque controller (HTC) with a four-level HTC for a three-level neutral-point clamped (NPC) inverter can reduce the torque and flux ripples in interior permanent magnet synchronous motor (IPMSM) drives. However, the torque will not be controlled properly within the upper HTC bands when driving the IPMSM in the medium and high-speed regions. This problem causes the stator current to drop, resulting in poor torque control. To resolve this problem, a simple algorithm based on a torque error average calculation is proposed. Firstly, the proposed algorithm reads the information of the calculated torque and the corresponding torque reference to calculate the torque error. Secondly, the average value of torque error is calculated instantaneously as the reference torque changes. Finally, the average value of the torque error is used to indicate the operation of the proposed algorithm without the need for motor speed information. By using the proposed algorithm, the torque can be controlled well in all speed regions, and thus, a better stator current waveform can be obtained. Simulation and experimental results validate the effectiveness of the proposed method.

Application of direct torque control in multi-level high power adjustable speed drive systems

Direct Torque Control of the Induction Motor Fed with a Three-Level Inverter

Multi-level Converter-Based Torque Sharing Function Control Strategy for Switched Reluctance Motors

A Direct Torque Control of Induction Motor Based on Three-Level NPC Inverter

Direct Torque Control of Induction Motor Fed by Three Level Inverter (I)--Single Vector Method

Speed Sensorless Direct Torque Control of 3-Level Inverter-Fed Induction Motor Drive Based on Optimized Switching Table

Direct torque control of induction motor fed by three level inverter (II) - Method of synthesizing vectors

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Direct Torque Control for 2L-VSI PMSM Using Switching Instant Table.

Enhanced Direct Torque Control for a Three-Level T-Type Inverter

Direct Power and Torque Control for Three-Level NPC Based PWM Ac/dc/ac Converter

Low-Speed Performance Improvement of Direct Torque Control for Induction Motor Drives Fed by Three-Level NPC Inverter

Four-Level Hysteresis-Based DTC for Torque Capability Improvement of IPMSM Fed by Three-Level NPC Inverter

An Improved Direct Torque Control for Three-Level Inverter-Fed Induction Motor Sensorless Drive

A three-level speed sensor-less DTC drive of induction motor based on a full-order flux observer

Implementation of Direct Torque Control Scheme for Induction Machines with Variable Structure Controllers

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

Applications of Induction Motor Drive Based on DTC in Railway Traction

An Effective Direct Torque Control Based on Space Vector Modulation for DTP-PMSM

Overview of the Direct Torque Control Strategy in Switched Reluctance Motor Drives

Study on the direct torque control of permanent magnet synchronous motor drives