Abstract:Direct torque control (DTC) is a widely used approach for motor drives due to its distinctive advantages, e.g., fast dynamic response and highly robust against motor parameters uncertainties and external disturbances. To achieve a lower torque ripple, a higher switching frequency is usually required, which, however, can reduce the drive efficiency. Using the emerging silicon carbide (SiC) devices, which can operate efficiently at a much higher switching frequency than their silicon counterparts, thus, it could be feasible to achieve high efficiency and low torque ripple simultaneously. In this work, a novel multilevel DTC for a SiC T-type inverter is proposed to significantly reduce the torque and flux ripples while retaining the fast-dynamic response. The unbalanced dc-link is a common issue of the T-type inverter, which may also lead to a higher torque ripple. To address this issue, the proposed DTC algorithm only uses the real voltage space vectors and virtual space vectors (VSVs) that do not contribute to the neutral point current such that an inherent dc-link capacitor voltage balancing can be achieved without using any active dc-link voltage controls or additional dc-link voltage and/or current sensors. The feasibility and effectiveness of proposed methods are verified by using both simulation and experimental studies.

Direct Torque Control of Induction Motor Fed by Three Level Inverter (I)--Single Vector Method

Direct Torque Control of the Induction Motor Fed with a Three-Level Inverter

Direct torque control of induction motor fed by three level inverter (II) - Method of synthesizing vectors

A Direct Torque Control of Induction Motor Based on Three-Level NPC Inverter

Speed Sensorless Direct Torque Control of 3-Level Inverter-Fed Induction Motor Drive Based on Optimized Switching Table

A Sequential Direct Torque Control Scheme for Seven-Phase Induction Machines Based on Virtual Voltage Vectors

Direct Torque Control for 2L-VSI PMSM Using Switching Instant Table.

Application of direct torque control in multi-level high power adjustable speed drive systems

A Direct Torque Control Strategy of Five-Phase Induction Motor with Duty Cycle Optimization

An Improved Direct Torque Control for Three-Level Inverter-Fed Induction Motor Sensorless Drive

Direct Torque Control of Three-Level Inverter Using Neural Networks As Switching Vector Selector

A three-level speed sensor-less DTC drive of induction motor based on a full-order flux observer

Research on Torque Ripple Minimization Strategy for Direct Torque Control of Induction Motors

A New Intelligent Control Strategy of Combined Vector Control and Direct Torque Control for Dynamic Performance Improvement of Induction Motor Drive

Direct Power and Torque Control for Three-Level NPC Based PWM Ac/dc/ac Converter

Predictive Direct Torque Control of Induction Motor Fed by Matrix Converter

Implementation of Direct Torque Control Scheme for Induction Machines with Variable Structure Controllers

Low-Speed Performance Improvement of Direct Torque Control for Induction Motor Drives Fed by Three-Level NPC Inverter

New Torque Direct Control Scheme Of Induction Machines And Its Dsp-Based Implementation

Direct Torque Control for Induction Motors Based on Minimum Voltage Vector Error

Enhanced Direct Torque Control for a Three-Level T-Type Inverter