Abstract:The performance of air-source heat pump is strongly influenced by ambient temperature variation. Improving its stability and efficiency during wintertime is important for promoting its applications, while existing studies paid few attentions to flexible parameter regulation of heat pump using mixture. In this paper, a single-stage compound air-source heat pump using ternary mixture was theoretically simulated and experimentally tested, in which operating parameters including pressure and concentration could be regulated with the cooperation of multiple valves and reservoirs. Using CO2/R134a/R600, operating pressure and mixture concentration were successfully regulated at ambient temperature from -30 & DEG;C to 0 & DEG;C, achieving a coefficient of performance from 1.834 to 2.546 when producing hot water at 75 & DEG;C. Whether R134a inclusion was favorable to energy performance depended on its influence on the temperature matching in recuperative process, especially the heat transfer process in recuperator. The addition of R134a significantly alleviated the increase of operating pressure and thus enlarged the operation range of this heat pump. The flammability range of CO2/R134a/R600 was calculated, indicating the insignificant influence of R134a on flammability retardance in the studied range of this paper. The significance of this study is further revealed with the potential advances of heat transfer technique and new-generation refrigerant. The findings in this paper contribute to: 1) the modification of air-source heat pump for operation at low temperature; 2) the regulation method for mixed-refrigerant system; 3) the exploration of new mixed-refrigerant in thermodynamic cycle.

Moderately high temperature water source heat-pumps using a near-azeotropic refrigerant mixture

A thermodynamic analysis of a transcritical cycle with refrigerant mixture R32/R290 for a small heat pump water heater

Study on Performance Matching and Zeotropic Characteristics of Non-ozone Depleting Refrigerant Mixture for Heat Pump

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

High temperature hot water heat pump with non-azeotropic refrigerant mixture HCFC-22/HCFC-141b

Refrigerants And Heat Pumps For Efficient Use Of Low Grade Thermal Energy

HIGH TEMPERATURE HEAT PUMP WITH NON-AZEOTROPIC REFRIGERANT MIXTURES

Thermodynamic analysis of cascade high-temperature heat pump using new natural zeotropic refrigerant mixtures: R744/R600 and R744/R601

Experiments of advanced centrifugal heat pump with supply temperature up to 100 °C using low-GWP refrigerant R1233zd(E)

Theoretical Study of HFO1336mzz(Z)/HFO1224yd(Z) Refrigerant Mixtures for High Temperature Heat Pump

Experimental Study on the Performance of High Temperature Air Source Heat Pump with Refrigerant Mixture

Selection and Validation on Low-Gwp Refrigerants for a Water-Source Heat Pump

Experimental Study of HFO-1234 Ze and HFC-32 Mixture on Heat Pump Water Heater

Experiments of Advanced High-Temperature Heat Pump Using Green Refrigerant R1233zd(E)

Research on Zeotropic Mixtures as Working Fluid of High Temperature Heat Pump for Waste Heat Recovery

SIMULATION AND COMPARISON OF AIR-SOURCE HEAT PUMPS USING VARIABLE COMPOSITION AND CONSTANT COMPOSITION MIXTURES OR PURE REFRIGERANT

Analysis and selection of the refrigerants for the moderate and high temperature water-source heat pump

Experimental and simulation study on R134a/RE170/R152a mixture as R134a replacement in a moderately-high temperature heat pump

Investigation on Application of Refrigerant R1234ze in High-temperature Heat Pump

Theoretical Performance Assessment of Low-GWP Refrigerant R1233zd(E) Applied in High Temperature Heat Pump System

Experimental performance of moderately high temperature heat pump with working fluid R1234ze(Z)