Abstract:The performance of air-source heat pump is strongly influenced by ambient temperature variation. Improving its stability and efficiency during wintertime is important for promoting its applications, while existing studies paid few attentions to flexible parameter regulation of heat pump using mixture. In this paper, a single-stage compound air-source heat pump using ternary mixture was theoretically simulated and experimentally tested, in which operating parameters including pressure and concentration could be regulated with the cooperation of multiple valves and reservoirs. Using CO2/R134a/R600, operating pressure and mixture concentration were successfully regulated at ambient temperature from -30 & DEG;C to 0 & DEG;C, achieving a coefficient of performance from 1.834 to 2.546 when producing hot water at 75 & DEG;C. Whether R134a inclusion was favorable to energy performance depended on its influence on the temperature matching in recuperative process, especially the heat transfer process in recuperator. The addition of R134a significantly alleviated the increase of operating pressure and thus enlarged the operation range of this heat pump. The flammability range of CO2/R134a/R600 was calculated, indicating the insignificant influence of R134a on flammability retardance in the studied range of this paper. The significance of this study is further revealed with the potential advances of heat transfer technique and new-generation refrigerant. The findings in this paper contribute to: 1) the modification of air-source heat pump for operation at low temperature; 2) the regulation method for mixed-refrigerant system; 3) the exploration of new mixed-refrigerant in thermodynamic cycle.

Analysis and selection of the refrigerants for the moderate and high temperature water-source heat pump

A thermodynamic analysis of a transcritical cycle with refrigerant mixture R32/R290 for a small heat pump water heater

Refrigerants And Heat Pumps For Efficient Use Of Low Grade Thermal Energy

Selection and Validation on Low-Gwp Refrigerants for a Water-Source Heat Pump

Experimental and Theoretical Assessments on the Systematic Performance of a Single-Stage Air-Source Heat Pump Using Ternary Mixture in Cold Regions

SIMULATION AND COMPARISON OF AIR-SOURCE HEAT PUMPS USING VARIABLE COMPOSITION AND CONSTANT COMPOSITION MIXTURES OR PURE REFRIGERANT

Investigation on Application of Refrigerant R1234ze in High-temperature Heat Pump

Experimental Study on New Variable Composition Heat Pump System

Simulation Study on Performance of an Air Source Heat Pump System Combined with Phase Change Thermal Storage Using Alternative Refrigerants

Experimental Investigation on the Performance of Ground-source Heat Pump with the Refrigerant R410A

Optimization Analyses on the Performance of an Auto-Cascade Absorption Refrigeration System Operating with Mixed Refrigerants

ANALYSIS OF THE PERFORMANCE DIFFERENCE OF MEDIUM-HIGH TEMPERATURE REFRIGERANT ON

Variable Flow Characteristic Analysis of R417A Enhanced Vapor Injection Heat Pump in Low Temperature

Performance Investigation on a Novel Air-Source Heat Pump Using CO2/HC for Recirculated Water Heater in Cold Regions

Investigation on Air Source Heat Pump Water Heater Used at Low Temperature

The Research on the Character of R22 and R134a Applied in Household Heat Pump Water Heater

High temperature hot water heat pump with non-azeotropic refrigerant mixture HCFC-22/HCFC-141b

Feasibility of R32 Using in Enhanced Vapor Injection Heat Pump Water Heater

Moderately high temperature water source heat-pumps using a near-azeotropic refrigerant mixture

Performance and Economic Analysis of Two Types of High-Temperature Heat Pump Based on New Refrigerants

Experimental and simulation study on R134a/RE170/R152a mixture as R134a replacement in a moderately-high temperature heat pump