The Wear Resistance Mechanisms and Decision of Critical Normal Load for In-situ Granular γ+(Fe, Mn)3C/γ Steel Matrix Composites

梁高飞,许振明,姜启川,李建国

DOI: https://doi.org/10.3321/j.issn:1006-2467.2004.07.005

2004-01-01

Shanghai Jiaotong Daxue Xuebao/Journal of Shanghai Jiaotong University

Abstract:Based on pin-on disc dry sliding tests and scanning electron microscopy (SEM) observation, the sliding wear behaviors of granular γ+(Fe, Mn)3C eutectics reinforced austenite matrix composites (abbreviated EAMC) under dry wear condition are studied. The wear testing shows that the wear process of EAMC can be divided into running-in and steady state regimes. The serious plastic deformation and flow occur to austenite matrix of EAMC in the running-in regime. The dominant wear mechanism of EAMC is the delamination wear at the steady state regime. The γ+(Fe, Mn)3C eutectic particles, as the main body against the normal load and abrasive wear, can delay the formation of dislocation depleted zone and accumulation of abrasive on the counterpart surfaces. The probability of the debris formation decreases, which results in the decrement of wear rate for EAMC and the increment of critical normal load. The criterion on the critical normal load for particulate reinforced composites is revised. The calculated results agree well with the experimental ones for EAMC.