Abstract:A zwitterionic polymer, poly(3-(methacryloylamino) propyl-dimethyl-(3-sulfopropyl) ammonium hydroxide) (poly(MPDSAH)) was successfully grafted in high density from the surface of poly(vinylidene fluoride) (PVDF) hollow fiber membrane via a two-step polymerization. Poly(2-hydroxyethyl methacrylate) (poly(HEMA)) chains were firstly grafted from outside surface of PVDF membrane through atom transfer radical polymerization (ATRP) to provide the initiation sites for subsequent cerium (Ce (IV))-induced graft copolymerization of polyMPDSAH in the presence of N,N′-ethylene bisacrylamide (EBAA) as a cross-linking agent. Attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) confirmed that the EBAA could stimulate zwitterionic polymers grafting onto the membrane surface. The dense poly(MPDSAH) layers on the PVDF membrane surface were revealed by the scanning electron microscope (SEM). The mechanical property of PVDF membrane was improved by the zwitterionic surface layers. The gravimetry results indicated the grafting amount increased to 520μg/cm2 for a copolymerization time of more than 3h. Static and dynamic water contact angle measurements showed that the surface hydrophilicity of the PVDF membranes was significantly enhanced. As the grafting amount reached 513μgcm−2, the value of contact angle dropped to 22.1° and the amount of protein adsorption decreased to zero. The cyclic experiments for BSA solution filtration demonstrated that the extent of protein fouling was significantly reduced and most of the fouling was reversible. The grafted polymer layer on the PVDF membrane showed a good stability during the membrane cleaning process. The experimental results concluded a good prospect in obtaining the sulfobetaine-modified PVDF membranes with high mechanical strength, good anti-protein-fouling performance, and long-term stability via the two-step polymerization.

SURFACE MODIFICATION OF POLYSULFONE MEMBRANE BY LOW TEMPERATURE PLASMA TREATMENT

Studies on the Affinity Membrane for Adsorption and Purification of Lysozyme(I) - Influence of Low-temperature Oxygen Plasma Treatment on Surface Structure and Adsorption Properties of the Affinity Membrane

Modification of a Membrane Surface Charge by a Low Temperature Plasma Induced Grafting Reaction and Its Application to Reduce Membrane Fouling

Surface immobilization of polymer brushes onto porous poly(vinylidene fluoride) membrane by electron beam to improve the hydrophilicity and fouling resistance

Surface modification of PVDF porous membranes by electron irradiation

Improving the Hydrophilicity of Poly(vinylidene Fluoride) Porous Membranes by Electron Beam Initiated Surface Grafting of AA/SSS Binary Monomers

Construction and separation performance of charged modification PSf membrane via interface crosslinking

Preparation and Characterization of Poly(vinylidene Fluoride) Flat Sheet Membrane with Tg Tunable Amphiphilic Terpolymer As Membrane Additive

THE SURFACE TREATMENT OF POROUS POLYPROPYLENE MEMBRANE BY AR PLASMA WITH A LOW POWER

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Surface Antifouling Modification on Polyethylene Filtration Membranes by Plasma Polymerization

Surface Modification of Poly(tetrafluoroethylene) Films Via Plasma Treatment and Graft Copolymerization of Acrylic Acid

Hydrophilic Modification of Porous Polymer Membranes by Low Temperature Plasma

Surface Structure and Hydrophilicity of Polypropylene Porous Membranes Modified by Maleic Anhydride Plasma Polymerization

Plasma surface modification of polypropylene microfiltration membranes and fouling by BSA dispersion

Surface Modification of Polyvinylidene Fluoride （PVDF） Membranes by Low-Temperature Plasma with Grafting Styrene

Surface Modification Of Microporous Polypropylene Membranes By Plasma-Induced Graft Polymerization Of Alpha-Allyl Glucoside

Construction of Negatively Charged Surface on Polypropylene Microporous Membrane and Its Resistance to Protein Adsorption

Surface Zwitterionicalization of Poly(Vinylidene Fluoride) Porous Membranes by Post-Reaction of the Amphiphilic Precursor

Surface Modification of Porous Polypropylene Membrane by PlasmaInitiated RAFT Graft Polymerization of Hydroxyethyl Methacrylate

Zwitterionic Sulfobetaine-Grafted Poly(vinylidene Fluoride) Membrane Surface with Stably Anti-Protein-fouling Performance Via a Two-Step Surface Polymerization