Abstract:A major problem in membrane technology for applications such as wastewater treatment or desalination is often the loss of membrane permeability due to biofouling initiated froth protein adsorption and biofilm formation on the membrane surface. In this study, we developed a relatively simple and yet versatile approach to prepare polypropylene (PP) membrane with highly effective non-biofouling performance. Copolymer brushes were grafted to the surface of PP membrane through UV-induced polymerization of two oppositely charged monomers, i.e., [2-(methacryloyloxy)ethyl]trimethylammonium chloride (TM) and 3-sulfopropyl methacrylate potassium salt (SA), with varying TM:SA molar ratios. Surface analysis with scanning electron microscope (SEM) clearly showed the grafted copolymer brushes on the membrane surfaces and that with X-ray photoelectron spectroscope (XPS) revealed a similar TM:SA ratio of the grafted copolymer brushes to that of the monomer solution used for the polymerization. Water contact angle measurements indicated that the hydrophilicity of the membrane: surfaces was remarkably improved by the grafting of the TM/SA copolymer brushes, with the lowest water contact angle of 27 degrees being achieved at the TM:SA ratio of around 1:1. Experiments for antiprotein adsorption with bovine serum album (BSA) and lysozyme (LYZ) and antibiofilm formation with Escherichia coli (E. coli) demonstrated a great dependence of the membrane performance on the TM:SA ratios of the grafted copolymer brushes. It was found that the characteristics of the surface charges of the membrane surfaces played a very important role in the non-biofouling performance, and the membrane surface with balanced positive and negative charges showed the best non-biofouling performance for the proteins and bacteria tested in this study.

Plasma surface modification of polypropylene microfiltration membranes and fouling by BSA dispersion

Studies on the Affinity Membrane for Adsorption and Purification of Lysozyme(I) - Influence of Low-temperature Oxygen Plasma Treatment on Surface Structure and Adsorption Properties of the Affinity Membrane

Surface modification of polypropylene microporous membranes to improve their antifouling property in MBR: NH3 plasma treatment

Fouling Resistance of 3-[[3-(trimethoxysilane)-propyl] Amino] Propane-1-sulfonic Acid Zwitterion Modified Poly (vinylidene Fluoride) Membranes

Surface Modification of Polypropylene Microfiltration Membranes by the Immobilization of Poly(n-Vinyl-2-pyrrolidone): a Facile Plasma Approach

Surface Antifouling Modification on Polyethylene Filtration Membranes by Plasma Polymerization

Surface modification of polypropylene microporous membrane to improve its antifouling property in MBR: CO2 plasma treatment

Achieving highly effective non-biofouling performance for polypropylene membranes modified by UV-induced surface graft polymerization of two oppositely charged monomers.

Plasma Graft Polymerization and Surface-Initiated Atom Transfer Radical Polymerization: Characteristics of Low-Fouling Membranes Obtained by Surface Modification with Poly(2-methoxyethyl Acrylate)

Surface Modification of Polypropylene Macroporous Membrane to Improve Its Antifouling Characteristics in a Submerged Membrane-Bioreactor: H(2)O Plasma Treatment.

Facile plasma grafting of zwitterions onto nanofibrous membrane surface for improved antifouling properties and filtration performance

NH3 plasma properties and surface modification PAN ultrafiltration membrane

Surface modification of polypropylene microfiltration membranes by the immobilization of poly (N-vinyl-2-pyrrolidone): a facile plasma approach

Modified PAN ultrafiltration membranes with low-temperature NH3 plasma

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Modification of Polyvinylidene Fluoride Membrane by Quaternary Ammonium Compounds Loaded on Silica Nanopollens for Mitigating Biofouling

Surface Modification Of Microporous Polypropylene Membranes By Plasma-Induced Graft Polymerization Of Alpha-Allyl Glucoside

Modification of a Membrane Surface Charge by a Low Temperature Plasma Induced Grafting Reaction and Its Application to Reduce Membrane Fouling

Antifouling Characteristics of Sugar Immobilized Polypropylene Microporous Membrane by Activated Sludge and Bovine Serum Albumin

Antifouling and Self-Cleaning Performances of the Porous Polypropylene Membrane Surface Grafted by P(NIPAAm-PEGMA)

Surface Modification of Polypropylene Microfiltration Membrane by Grafting Poly(sulfobetaine Methacrylate) and Poly(ethylene Glycol): Oxidative Stability and Antifouling Capability