Abstract:Monitoring geotechnical structures and providing real-time early warning is a key measure to mitigate the impacts of disasters (slope slip, subsidence, dam deformation, bridge settlement, etc.). The fiber Bragg grating (FBG) flexible sensor, developed by the combination of flexible material and an FBG sensor, is widely used in geotechnical engineering health monitoring due to its excellent performance. The flexible sensor can perform regional and quasi-distributed measurements of the displacement field of the measured structure, and accurately reflect the operating state of the engineering structure. However, in practical engineering applications, factors such as the strain-transfer rate between the flexible substrate and sensing points, the displacement reconstruction algorithm, and the arrangement interval of the sensing points can cause measurement error, which, in turn, leads to a decrease in the displacement-measurement accuracy. In this paper, the following analysis is performed by means of theoretical derivation and model establishment. The influence of the length, width, and thickness of the cemented layer, the shear modulus of the flexible substrate, and the radius of the groove on the strain-transfer rate were analyzed, and the referential parameters were determined. The displacement reconstruction algorithm is essentially a recursive algorithm, which inevitably introduces cumulative error; the relationship between the layout interval of the sensing points and the measurement error is discussed. Considering the fabrication cost of the sensor and the allowable range of error, a sensing-point-layout interval of 100 mm was chosen. The feasibility and effectiveness of the simulation theory were verified by carrying out deformation-sensing experiments on the developed FBG flexible sensor. The research results can theoretically guide the packaging and fabrication of the FBG flexible sensor, thereby improving the measurement accuracy of the flexible sensor for the measured structure.

Study on Total Distance Positioning of In-Pipe Robot -Based on Fiber Bragg Grating Curvature Spatial Sensor

Photoelectric Detection and 3D Reconstruction System for the Inner Surface of Small-Diameter Pipes

In-pipe Positioning Micro-Robot Based on Cymbal Actuators and Optical Navigation

In-Pipe Detection of Three-Dimensional Curving Mini-Pipe

Shape sensing using neural network of radial basis function based on Fiber Bragg Grating

3D Reconstruction of Small-diameter Pipes Inner Surface Based on Structural Light

Local Geometric Measurement for 3-D Curved Micro-Pipe

Noncontact Laser Inspection Based on a PSD for the Inner Surface of Minidiameter Pipes.

Online Path Correction under End Point Nonholonomic Constraints – Implementation with Visual Sensing in Robotic Fiber Placement

An automatic calibration algorithm for endoscopic structured light sensors in cylindrical environment

A Study on Tunnel Deformation Monitoring Based on BOTDA

Development and Application of an Optical Fiber Sensor Based In-Place Inclinometer for Geotechnical Monitoring

High Precision In-Pipe Robot Localization with Reciprocal Sensor Fusion

Research on Three-Dimensional Shape Curve Reconstruction Technology for a Scraper Conveyor on an Intelligent Working Face

Shape Detection and Reconstruction of Soft Robotic Arm Based on Fiber Bragg Grating Sensor Array.

New Interpolation Method For Shape Sensors Based On Fiber Bragg Grating

Monitoring of Lateral Displacements of a Slope Using a Series of Special Fibre Bragg Grating-Based In-Place Inclinometers

Measurement-Error Analysis of Fiber Bragg Grating Flexible Sensor for Displacement-Field Monitoring of Geotechnical Engineering

FBG-based online monitoring for uncertain loading-induced deformation of heavy-duty gantry machine tool base

The Structural Design for Internal Diameter of The Pipeline Measured Robot

Parametric reflection of the quasi-distributed optical fiber sensors with flexible packaging layer for bending strain measurement