Abstract:Phase sensitive optical time domain reflectometry (Φ-OTDR) has been widely used in many applications for its distributed sensing ability on weak disturbance all along the sensing fiber. However, traditional Φ-OTDR cannot make quantitative measurement on the external disturbance due to the randomly distributed position and reflectivity of scatters within the optical fiber. Recently, some methods have been proposed to realize quantitative measurement of dynamic strain. In these literatures, the fiber with or without FBGs in practice was easily damaged and with difficulty of maintenance. PZT is employed to generate strain event in the fiber. There is a large gap compared with the real detecting environment, which will not reveal the full performance of the sensing system. In this paper, a distributed optical fiber sensing (DOFS) system for dynamic strain measurement based on artificial reflector is proposed and demonstrated experimentally. The fiber under test (FUT) is composed by four 20-meter long single mode optical fiber patch cords (OFPCs), which are cascaded with ferrule contactor/physical contact (FC/PC) connectors via fiber flanges. The fiber facet of FC/PC connector forms an artificial reflector. When the interval between the two reflectors is changed, the phase of the interference signal will also be changed. A symmetric 3×3 coupler with table-look-up scheme is introduced to discriminate the phase change through interference intensity. In our experiment, the center 10m section of the second OFPC is attached to the bottom of an aluminum alloy plate. An ordinary loudspeaker box was located on the top of the aluminum alloy plate. The dynamic strain generated by the loudspeaker box is transmitted from the aluminum alloy plate to the OFPC. Experimental results show that the proposed method has a good frequency response characteristic up to 3.2 kHz and a linear intensity response of R2=0.9986 while the optical probe pulse width and repetition rate were 100ns and 10 kHz respectively. Meanwhile, triangle and cosine amplitude-modulated (AM) dynamic strain applied on the fiber are successfully discriminated. The artificial reflectors based on FC/PCs were easily assembled and maintained, and the method of vibration transmission closely resembled the real circumstance than PZT. Therefore, these advantages will extend the potential of this Φ-OTDR technology in structure health monitoring.

Parametric reflection of the quasi-distributed optical fiber sensors with flexible packaging layer for bending strain measurement

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Discrete curvature-based shape configuration of composite pipes for local buckling detection based on fiber Bragg grating sensors

Improving the durability of the optical fiber sensor based on strain transfer analysis

A Distributed Optical Fiber Sensing System for Dynamic Strain Measurement Based on Artificial Reflector

Deformation measurement based on high resolution distributed optical fiber sensing and conjugated beam method

Strain Modal Analysis of Small and Light Pipes Using Distributed Fibre Bragg Grating Sensors

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

Fiber Bragg grating array-based shape sensing for structural health monitoring of cylindrical marine structures

The Experimental Study of Distributed Optical Fiber Sensor Based on Metal Banding

Research on the methodology of development and calibration of flexible encapsulated fiber Bragg grating sensors

Distributed and multimodal strain sensing performance of flexible hydrogel functional optical fibers

Research on Optical Fiber Sensor Based on Underwater Deformation Measurement

Performances of Distributed Fiber Optic Strain Sensor with Thin-Walled Ring

Distributed fiber optic sensing for internal strain monitoring in full life cycle of concrete slabs with BOFDA technology

Monitoring of pipelines subjected to interactive bending and dent using distributed fiber optic sensors

Silicone Rubber-Packaged FBG Sensing Information and SSI-COV-Recognized Modal Parameters Motivated Damage Identification in Pipe Structures

A study on fiber Bragg grating (FBG) strain sensor based on symmetrical lever structure

Development of Distributed Long-gage Fiber Optic Sensing System for Structural Health Monitoring

Monitoring Flexure Behavior of Compacted Clay Beam Using High-Resolution Distributed Fiber Optic Strain Sensors

Measurement-Error Analysis of Fiber Bragg Grating Flexible Sensor for Displacement-Field Monitoring of Geotechnical Engineering