Abstract:To improve the mechanical properties of Nb-Si-Zr based superalloys at room temperature, the effect of a trace amount of Cr, C, Hf, Ta and Sc elements on the solidification processes, phase composition, mechanical properties and fracture behavior of Nb-Si-Zr based superalloys are studied by vacuum non-consumable arc-melting. The results show that the based alloy consists Nbss phase, γ-(Nb,X)5Si3 phase and Zr-rich γ-(Nb,X)5Si3 phase. However, there is no Zr-rich γ-(Nb,X)5Si3 phase in 20Zr-2C and 20Zr-4Hf alloys, indicating that a trace amount of C or Hf elements accelerates the diffusion of Zr element, and improves the segregation of the Nb-Si-Zr based alloys for the later stage of the superalloy solidification. The Nbss fraction in the matrix alloy (20Zr alloy) is 60%. C element increases the Nbss phase fraction by 4%, and Cr and Sc elements reduce the Nbss phase fraction by 4% and 6%, Hf and Ta elements reduce the Nbss phase by 1% and 2% compare with the matrix alloy (20Zr alloy). C element is dissolved in Nbss phase and γ-(Nb,X)5Si3 phase, while Cr element is more dissolved in Nbss phase and Sc element is more dissolved in Zr-rich γ-(Nb,X)5Si3 phase. The toughness of 20Zr-2 C alloy is the highest, and its K Q value reaches 14.05 MPa·m1/2, compared with the matrix alloy (20Zr alloy) increased by 23.46%. The enhancement of Nbss phase fraction and petal shaped microstructure make the crack propagation more difficult, thus increasing the K Q value of the 20Zr-2C alloy. The compressive properties of 20Zr-4Cr alloy are the best, and its compressive strength reaches 1807.3 MPa, compared with the matrix alloy (20Zr alloy) increased by 17.09%. The reason is that a trace amount of Cr element increases the fraction of γ-(Nb,X)5Si3 phase.

Existing form of Nb in Zr-Sn-Nb-Fe alloys and its dependence on intermediate annealing

Microstructure of Zr-0.8sn-1nb-0.3fe Zr Alloys

On the Interactions Between Alloying Element Niobium and Interstitial/vacancy in Zr-Nb Alloy: A First-Principles Study

Abnormal Alloying Behaviour Observed in an Immiscible Zr–Nb System

Effect of Nb on Corrosion Resistance of New Zirconium Alloys

Investigation of Intermediate Phases and Phase Transition Temperature of Α/β in the Zr-Sn-Nb-Fe Alloy

Effect of Nb Addition on Thermal Stability, Glass Forming Ability and Mechanical Properties of Zr-Based Bulk Amorphous Alloys

The Microstructural Characteristics and Mechanical Properties of Nb-16Si-22Ti-2Al-2Cr Alloys with Zr Addition

Investigation on Microstructural Evolution and Hardening Mechanism in Dilute Zr–Nb Binary Alloys

Effect of Zr on the Morphology, Microstructure and Mechanical Properties of Nbta0.5tizrx Refractory High Entropy Alloy Fabricated by Selective Laser Melting

Microstructure and mechanical properties of Nb 16Si alloys with Zr additions

Preparation And Thermal Stability Of Zr-Al-Ni-Cu-Nb Bulk Amorphous Alloy Matrix Composites

The Origin of Corrosion Resistance Change Induced by Sn and Nb Alloying in Zr Alloys

Microstructures and Mechanical Properties of Cast Nb-Ti-Si-Zr Alloys

Investigation of Mechanical and Diffusion Properties in Bcc Ti−Nb−Zr−Sn Alloys Via a High-Throughput Method

Heterogeneous nucleation of β-type precipitates on nanoscale Zr-rich particles in a Mg-6Zn-0.5Cu-0.6Zr alloy

Atom Probe Tomography Study of Fe Segregation at Phase Interface in Zr–2.5Nb Alloy

Formation and Crystallization Behavior of Fe-based Amorphous Precursors with Pre-Existing Α-Fe Nanoparticles—structure and Magnetic Properties of High-Cu-content Fe-Si-B-Cu-Nb Nanocrystalline Alloys

Interdiffusion behaviors and mechanical properties of Zr-X (X Nb, Ta, Hf) binary systems

Mechanical properties and microstructure evolution of NbSiZr based alloy

Ab - initio study of alloying effects on structure stability and mechanical properties of α-Nb 5 Si 3