Abstract:In this paper, the fatigue life of 2D woven ceramic-matrix composites, i.e., SiC/SiC, SiC/Si-N-C, SiC/Si-B4C, and Nextel 610™/Aluminosilicate, at room and elevated temperatures has been predicted using the micromechanics approach. An effective coefficient of the fiber volume fraction along the loading direction (ECFL) was introduced to describe the fiber architecture of preforms. The Budiansky-Hutchinson-Evans shear-lag model was used to describe the microstress field of the damaged composite considering fibers failure. The statistical matrix multicracking model and fracture mechanics interface debonding criterion were used to determine the matrix crack spacing and interface debonded length. The interface shear stress and fibers strength degradation model and oxidation region propagation model have been adopted to analyze the fatigue and oxidation effects on fatigue life of the composite, which is controlled by interface frictional slip and diffusion of oxygen gas through matrix multicrackings. Under cyclic fatigue loading, the fibers broken fraction was determined by combining the interface/fiber oxidation model, interface wear model and fibers statistical failure model at elevated temperatures, based on the assumption that the fiber strength is subjected to two-parameter Weibull distribution and the load carried by broken and intact fibers satisfy the Global Load Sharing (GLS) criterion. When the broken fibers fraction approaches to the critical value, the composites fatigue fractures. The fatigue life S-N curves of 2D SiC/SiC, SiC/Si-N-C, SiC/Si-B4C, and Nextel 610™/Aluminosilicate composites at room temperature and 800, 1000 and 1200 °C in air and steam have been predicted.

Prediction of Fatigue Lifetime in Bio-Ceramics

The Predictions and Applications of Fatigue Lifetime in Alumina and Zirconia Ceramics

Fatigue Fracture Behavior of Zirconia Ceramic in Water Environment

BEHAVIOR OF CRACK PROPAGATION IN SOME BIO-CERAMICS

In Vitro Cyclic Fatigue and Hydrothermal Aging Lifetime Assessment of Yttria-Stabilized Zirconia Dental Ceramics

Prediction of long-term fatigue life of CFRP composite hydrogen storage vessel based on micromechanics of failure

Strength Degradation and Lifetime Prediction of Dental Zirconia Ceramics under Cyclic Normal Loading.

A Comparison of Failure Predictions by Dynamic Bending and Cyclic Bending Fatigue Techniques for Y2O3ZrO2 Ceramics

Fatigue Life Prediction of 2D Woven Ceramic-Matrix Composites at Room and Elevated Temperatures

A fatigue life prediction approach for porosity defect-induced failures in directed energy deposited Ti-6Al-4V considering crack growth environment

Research On The Cyclic Fatigue Behavior Of Zirconia Ceramics At The Room Temperature

Plastic Energy Dissipation Model for Lifetime Prediction of Zirconium and Zircaloy-4 Fatigued at RT and 400°C

Fracture simulation for zirconia toughened alumina microstructure

The Effect of Random Load on Life Prediction of High-Temperature Ceramic Matrix Composites

Fatigue Fracture Micro-Mechanism of a Machinable Glass-Ceramic

Mechanical and Environmental Factors in the Cyclic and Static Fatigue of A Machinable Glass-Ceramic

Micromechanical life prediction method of fiber-reinforced ceramic-matrix composites subjected to stochastic overloading at room temperature

An Approach for Fatigue Life Prediction

Fatigue Damage Modes of Bilayered Zirconia and Alumina Dental Composites

The Effects of Load and Frequency on the Fatigue Damage of Bi-Layered Zirconia and Alumina Dental Composites

Cyclic Deformation Behavior and Fatigue Life Prediction of an Automotive Cast Aluminum Alloy: A New Method of Determining Intrinsic Fatigue Toughness