Abstract:Deformation and heat treatment are important means to strengthen aluminum alloys. However, the influence mechanism of pre-strain on aging precipitation kinetics and its effect on mechanical properties are still not clear. In this work, uniaxial isothermal tensile tests with different strains and artificial aging treatments for Al-Zn-Mg-Cu alloys have been carried out. Then, a model describing the precipitates kinetic behavior has been developed to investigate the effect of thermal pre-strain on subsequent aging precipitation kinetics and peak aging microhardness based on the microstructure characterization by TEM, SAXS and XRD tests. In addition, the role of dislocations on the aging precipitation kinetics is also explored. The experimental results show that the peak aging microhardness of the Al-Zn-Mg-Cu alloy reveals a tendency to decrease and increase and then the peak aging time firstly decreases and then keeps almost constant with the increase in the strain. The calculations demonstrate that the precipitate average size almost remains unchanged, while the precipitate volume fraction decreases and then increases with the increase in strain, which is consistent with the change in peak aging microhardness. It also indicates that dislocations can promote precipitate nucleation and growth, while the actual effect depends on the dislocation density, which is closely dependent on the pre-deformation condition, especially for the precipitate nucleation. In particular, when the dislocation density after thermal pre-deformation is not enough, it will slightly inhibit precipitate nucleation but promote precipitate growth, which could shorten the peak aging time, with the peak aging strength being guaranteed.

Effect of external stress on the growth of precipitates in Al-Cu and Al-Cu-Mg-Ag alloys

Mechanism of Stress Aging in Al-Cu（-Mg-Ag） Alloys

Effects of External Stress on Aging Precipitation Behavior of Al-Cu-Mg-Ag Alloy

Effect of External Stress on Kinetics of Precipitation and Morphologies of Precipitates in Al-Cu-Mg Alloy with High Cu/Mg Ratio

Stress induced precipitates microstructure in the anisotropy alloys

Effects of External Stress During Aging on Microstructure and Properties of AI-Cu-Mg-Ag Alloy

Effects of External Stress Aging on Morphology and Precipitation Behavior of Θ″ Phase in Al-Cu Alloy

Quantitative study of the effect of stress on the precipitation in an Al-Cu-Mg-Ag alloy single crystal

Effects of Stress-Aging on the Microstructure and Properties of an Aging Forming Al–Cu–Mg–Ag Alloy

The Effect of Stress-Aging on Dimensional Stability Behavior of Al-Cu-Mg Alloy

Effect of Tensile Stress on Microstructure Evolution of Al-Cu-Mg-Ag Alloys

Evolution of precipitates during two-stage stress-aging of an Al-Zn-Mg-Cu alloy

The effect of Ag addition on the microstructure evolution in peak aging and retrogression and re-aging processes of an Al-Zn-Mg-Cu-Zr alloy

Effect of stress coupled with electric field on microstructure of 2524 aluminum alloy

Effect of edge dislocations on the distribution of ȡ precipitates in stress-aged Al-Cu single crystal

Stress-induced Thickening of Ω Phase in Al–Cu–Mg Alloys Containing Various Ag Additions

Effect of Stress on Microstructure and Mechanical Properties during Age Forming Process of 7050 Aluminum Alloy

Experimental and Simulation Study for the Influence of Thermal Pre-Deformation on Subsequent Aging Precipitation Kinetics of Al-Zn-Mg-Cu Alloy

Effect of applied stress level on anisotropy in creep-aging behavior of Al–Cu–Li alloy

The inhibiting effect of dislocation helices on the stress-induced orientation of S' precipitates in Al–Cu–Mg alloy

Effect of Heat Treatments on Microstructures and Tensile Properties of Cu–3 Wt%ag–0.5 Wt%zr Alloy