Abstract:Due to the complex multiscale interaction between intense turbulence and relatively weak flames, turbulent premixed flames in the thin and broken reaction zones regimes exhibit strong finite-rate chemistry and strain effects and are hence challenging to model. In this work, a laboratory premixed jet flame in the broken reaction zone, which has recently been studied using direct numerical simulation (DNS), is modeled using a large eddy simulation (LES)/dynamic thickened flame (DTF) approach with detailed chemistry. The presence of substantial flame thickening due to strong turbulence-chemistry interactions, which can be characterized by a high Karlovitz number (Ka), requires the DTF model to thicken the flame in an adaptive way based on the local resolution of flame scales. Here, an appropriate flame sensor and strain-sensitive flame thickness are used to automatically determine the thickening location and thickening factor, respectively. To account for finite-rate chemistry and strain effects, the chemistry is described in two different ways: (1) detailed chemistry denoted as full transport and chemistry (FTC), and (2) tabulated chemistry based on a strained premixed flamelet (SPF) model. The performance of the augmented LES/DTF approach for modeling the high Ka premixed flame is assessed through detailed a posteriori comparisons with DNS of the same flame. It is found that the LES/DTF/FTC model is capable of reproducing most features of the high Ka turbulent premixed flame including accurate CO and NO prediction. The LES/DTF/SPF model has the potential to capture the impact of strong turbulence on the flame structure and provides reasonable prediction of pollutant emissions at a reasonable computational cost. In order to identify the impact of aerodynamic strain, the turbulent flame structure is analyzed and compared with unstrained and strained premixed flamelet solutions. The results indicate that detailed strain effects should be considered when using tabulated methods to model high Ka premixed flames.

Detached-eddy simulation k-ε turbulence model and its application in fire simulations

Constrained Large-Eddy Simulation and Detached Eddy Simulation of Flow Past a Commercial Aircraft at 14 Degrees Angle of Attack

Large Eddy Simulation/dynamic Thickened Flame Modeling of a High Karlovitz Number Turbulent Premixed Jet Flame

AN EXTENDED K-Ε MODEL FOR NUMERICAL SIMULATION OF WIND FLOW AROUND BUILDINGS

Large Eddy Simulation of Temperature Field and Velocity Field in Standard Fire Test Room

Influence of the turbulence model on the numerical predictions of cold turbulent flow in a heavy-duty gas turbine DLN combustor

Iddes Simulation of Supersonic Combustion Using A Compressible Flamelet Modeling

Application of Large Eddy Simulation to Smoke Movement

Computation of Several Turbulent Flows with the Des-Sa Model

IDDES simulation of hydrogen-fueled supersonic combustion using flamelet modeling

IDDES Method Based on Differential Reynolds-stress Model and Its Application in Bluff Body Turbulent Flows

ICONE15-10174 the Numerical Comparison of Fire Combustion Model and Water-Mist Suppression with Experiments by FDS Code

Modeling Fire-Induced Smoke Spread and Carbon Monoxide Transportation in a Long Channel: Fire Dynamics Simulator Comparisons with Measured Data

Large Eddy Simulation in Turbulent Combustion Research

Simulations of Complex Turbulent Flows with RANS-LES Hybrid Approaches

Improvements for the DDES Model with Consideration of Grid Aspect Ratio and Coherent Vortex Structures

Study On Simulation Of The Building Fires Using An Advanced New Model

Validation And Evaluation Of Large Eddy Simulation Based Field-Zone Model For Smoke Movement In Building Fires

Evaluation of Numerical Dissipation Sensitivity Using IDDES

Numerical Dissipation Effects on Detached Eddy Simulation of Turbomachinery Flows

Large-eddy Simulation of Hydrothermal Flames Using Extended Flamelet/progress Variable Approach