Abstract:Creep-fatigue interaction is identified as a primary failure mode for components operating under high temperatures. As operational durations extend, this interaction not only alters the material's microstructures but also initiates a gradual degradation in mechanical properties, significantly impacting its deformation and damage behaviors. In this work, the dynamic microstructural evolution of GH4169 superalloy during creep-fatigue was elucidated via qualitative characterization, and damage level evaluation method was subsequently developed by bridging microstructure degradation to mechanical property degradation. Creep-fatigue tests were performed at 650 °C with various tensile holding times and were interrupted at lifetime fractions of 10 %, 50 % and 80 % for further analysis and tensile evaluations. Results revealed that the prolonged exposure to holding times induced the coarsening of γ″ precipitates alongside an increase in low-angle grain boundaries, culminating a reduction in creep-fatigue strength. The development of voids and cracks exacerbated the degradation of elongation, leading to a hybrid fracture mode encompassing both intergranular and transgranular cracking paths. Synthesizing microstructural evolutions to qualitatively categorize diverse degradation levels imparted a robust physical basis for damage evaluation. A mapping model was established to correlate the average kernel average misorientation (micro-degradation indicator) with the tensile plastic strain energy density (macro-degradation indicator). The damage level evaluation method was endowed with quantitative metrics utilizing this model, and its generality was additionally validated in P92 steel. This work offers an insight into the quantitative damage evaluations of creep-fatigue-induced degradations in materials, thereby providing a theoretical basis for the development of operation management and inspection plans of components.

FATIGUE DAMAGE ACCUMULATION OF [±20°] STEEL/RUBBER COMPOSITE

EXPERIMENTAL STUDY ON FATIGUE PROPERTIES OF [±20°] STEEL-CORD RUBBER COMPOSITE

Study on fatigue damage of a laminated rubber composite

Fatigue Properties of Steel Cord-Rubber Composite

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Mechanistic Modeling of Fatigue Crack Growth in Asphalt Fine Aggregate Matrix under Torsional Shear Cyclic Load

A New Approach for Studying Fatigue Damage

FATIGUE DAMAGE PROPERTIES OF RUBBER COMPOSITES

Research on Fatigue-Creep Interaction Damage of Steel 1.25Cr0.5mo

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Assessment of prior fatigue damage and a new approach to predict remanent creep rupture of P92 steel

The correlation between prior fatigue damage and remaining creep properties in a high chromium steel welded joint

Creep-fatigue Damage Level Evaluation Based on the Relationship Between Microstructural Evolution and Mechanical Property Degradation

Progressive damage modelling and fatigue life prediction of Plain-weave composite laminates with Low-velocity impact damage

Fatigue Behavior of Cord-Rubber Composite Materials under Different Loading Conditions

Isodamage Curve-Based Fatigue Damage Accumulation Model Considering the Exhaustion of Static Toughness

Evaluation of fatigue and creep-fatigue damage levels on the basis of engineering damage mechanics approach

Damage Behavior and Life Prediction Model of Composite Laminates under Combined High and Low Cycle Fatigue

STUDY ON FATIGUE BEHAVIOR OF UNIDIRECTONAL POLYESTER CORD/RUBBER COMPOSITES

A New 3D Creep-Fatigue-Elasticity Damage Interaction Diagram Based on the Total Tensile Strain Energy Density Model

Fatigue of Unidirectional Cord-Rubber Composites