Abstract:The quenched M50NiL steel was plasma nitrocarburized at 500°C with rare earth (RE) addition. The RE nitrocarburized layer of M50NiL steel was removed stepwise (0μm, 12μm, 65μm and 100μm from the surface) and characterized using SEM equipped with EDS, XRD and microhardness tester respectively. Depth-related wear behavior of the RE nitrocarburized layer of M50NiL steel was investigated using pin-on-disk tribometer. The results show that the surface layer (0μm from the surface) mainly consists of α′N,C (expanded martensite), γ′-Fe4(N,C), ɛ-Fe2–3(N,C) and a trace of Fe3O4 phase. The phase structure of the inner layers is single α′N,C or α′-Fe. There is a lower steady stage for all the depth-related friction coefficients of the layers due to the generation of the compact oxide film. The layer 12μm from the surface has the lowest wear rate which is 2.4660×10−5mm3N−1m−1. The work hardening effect only occurred on the layer 100μm from the surface. The wear mechanisms of the layers transformed from mild abrasive and oxidative wear (0μm from the surface) to severe adhesive and oxidative wear (100μm from the surface) due to different phase structures and hardness. The oxygen content of the wear scar increases as the flash temperature rises and the hardness decreases when the layer comes inwards. The highest wolfram content for the layer 65μm from the surface results in the dual role of the wear mechanism and hardness.

Analysis Of Valence Electron Structure In Compound Layer Of Steel 42crmo Plasma Nitrided With Rare Earth Addition

Microstructure and Properties of Plasma Nitrided 00cr12ni9mo4cu2ti Maraging Stainless Steel

Acceleration of Plasma Nitriding at 550 °C with Rare Earth on the Surface of 38CrMoAl Steel

Effect of rare earth addition on microstructure and corrosion behavior of plasma nitrocarburized M50NiL steel

Microstructure and mechanical properties of M50NiL steel plasma nitrocarburized with and without rare earths addition

The effect of rare earth on microstructure and wear resistance of plasma electrolytic carburizing layer on 17–4PH stainless steel

Nurmerical simulation of nitrogen concentration profile in 42CrMo steel during plasma nitriding

An effective and innovative application of rare-earth plasma nitriding on high entropy alloy CoCrCuFeNi

Low-Temperature Plasma Nitriding of 3Cr13 Steel Accelerated by Rare-Earth Block

Improvement in Surface Properties of M50NiL Steel by Plasma Nitriding with Rare Earth Addition

Microstructure characterization and formation mechanism of lanthanum phosphide in FeCrAlRE alloy with ultra-low oxygen

Characterization and electrochemical behavior of a multilayer-structured Ti–N layer produced by plasma nitriding of electron beam melting TC4 alloy in Hank's solution

Study on depth-related microstructure and wear property of rare earth nitrocarburized layer of M50NiL steel

Effect of rare earth elements on plasma electrolytic carbonitriding of Ti–6Al–4V alloy

Nitrogen–carbon-induced Spinodal Structure in Plasma Nitrocarburized 38crmoal with Hollow Cathode Discharging

Investigation on Multi-Element Ni–Cr–Mo–Cu Alloying Layer by Double Glow Plasma Alloying Technique

Study on RE-Al-Zr-C-N Coating by X-ray Photoelectron Spectroscopy

Effect of carbon and nitrogen diffusion zone on growth mechanism of boride layer produced on Q235 Steel

High-throughput search for RE (La, Ce and Y) contained stoichiometric compound in steels