Abstract:Despite recent advances and improvements in modeling and prediction of the dynamics of the machining process, an efficient machining process is limited due to chatter and instability of machining system. In fact, the machining system contains various kinds of joints, which cause difficulties in dynamics modeling, simulation and prediction. Moreover, the flexible support system results in large deformation and violent vibration of the workpiece when machining, and the thin-walled workpiece easily gives rise to the chatter of the machining system. Therefore, the dynamics of the flexible support system was considered to calculate stability lobe diagram in the modeling of milling process. The whole machining system was regarded as a closed loop composed by the machine tool structures, support, workpiece and machining process. In this paper, the receptance coupling (RC) method was introduced to predict the dynamics of the closed machining system. A milling process was taken for example to predict the chatter limitations using the dynamics of closed model. The mathematical model of the machining system (machine tool structures, spindle, holder and tool), together with the details of joint contacts, was given based on the RC method. The RC model was used to obtain the dynamics of the system, while receptance of the tool point was coupled. Based on the coupling model of the machining system, the depth limitations under different speeds were estimated for the technology parameter optimization in milling process. The response was considered to be the sum of the cutting point and the support system. The flexibility of the support system was considered to be the feedback of the cutting stiffness. By this means, the traditional model was modified to calculate the stability lobe diagram based on the dynamics of the spindle and support system. Furthermore, the milling experiment was carried out to verify the prediction results, and the dominant natural frequencies of receptance at tool point were obtained by modal testing to define the stability lobe diagram. It was found that the chatter results matched well with the stability lobes. It was concluded that the support system with poor stiffness might cause violent chatter especially when the workpiece was thin-walled. The cutting depth limitations of the flexible support system were lower than that of the rigid one. Moreover, this closed model of the machining system is appropriate for the chatter prediction of the flexible support system or thin-walled workpiece, so it is helpful for a better parameter optimization.

A STUDY ON THE IMPROVEMENT OF MACHINING SYSTEM STABILITY BY APPLYING ULTRASONIC ELLIPTICAL VIBRATION CUTTING

Experimental and simulation study on chatter stability region of integral impeller with non-uniform allowance.

Application of Mirror-Milling Machining System to Suppress Vibration in Thin Plate Work-Piece

Study of machining accuracy in ultrasonic elliptical vibration cutting

Analysis and experimental investigation on the cutting process stability of machine tool

Milling Stability Prediction for Flexible Workpiece Using Dynamics of Coupled Machining System

Chatter stability analysis and prediction for elliptical ultrasonic vibration-assisted milling process

Experimental Investigation on the Effects of Thermomechanical Loading on the Vibrational Stability During Rotary Ultrasonic Machining

Ultrasonic Elliptical Vibration Cutting for Weak Rigidity Workpiece

Investigation of Strengthening Effect on the Machining Rigidity in Longitudinal Torsional Ultrasonic Milling of Thin-Plate Structures

Research on the influence of robot structural mode on regenerative chatter in milling and analysis of stability boundary improvement domain

Research on Efficiency and Stability of Computer Numerical Control Lathe

Analysis of Regenerative Chatter Suppression with Adding the Ultrasonic Elliptical Vibration on the Cutting Tool

Milling Stability Prediction and Adaptive Chatter Suppression Considering Helix Angle and Bending

Effect of Vibration Assistance on Chatter Stability In Milling

Stability Prediction of Milling Process with Closed Machining System Dynamics with Flexible Thin-Walled Workpiece

Study on the Thrust Cutting Force in Ultrasonic Elliptical Vibration Cutting

Digital Twin-Driven Senseless Cutting Force Monitoring and Vibration Stability Control of a Rotary Ultrasonic Machining System

Study the effect of anti-vibration edge length on process stability of milling thin-walled Ti-6Al-4V alloy

Residual stresses in ultrasonic vibration assistance turning cemented carbide

Prediction of Time-Varying Chatter Stability: Effect of Tool Wear