Abstract:Utilizing carbon nanotubes (CNTs) as substitutes for the conventional rigid indium-tin oxide (ITO) electrodes, all CNT based flexible field emission devices (FEDs) were possible to prepare with a novel film transfer method. In the method, both CNT-based flexible cathode and anode were fabricated by first attaching the vacuum filtered CNT film/mixed cellulose eater (MCE) filter membrane to an adhesive semi-cured poly(dimethyl siloxane) substrate, and then peeling off the MCE filter membrane. Effects of bending direction and bending radius on field emission properties were studied. The field emission performance of the convex bending device was worse than that of the flat device and deteriorated further with the decrease of bending radius. In contrast, the concave bending device exhibited better field emission properties than the flat device; nevertheless, its field emission properties decreased as the concave bending radius reduced below a certain value. The method achieved two successes. One is that the interfacial interaction between CNT films and the flexible substrate was greatly enhanced. The other is that the transfer process improved the field emission properties due to the increase of vertically aligned CNT tips. Compared with traditional methods applied in FED preparation, the novel modified transfer method is organic free, easy to control, cheap, and environment friendly.

Fabrication and Optimization of Triode Structure Cnt-Feds

All carbon nanotube based flexible field emission devices prepared through a film transfer method

Fabrication and Characterization of Gated Carbon Nanotube Emitters in A Trench Structure

The Fabrication and Operation of Fully Printed Carbon Nanotube Field Emission Displays

Secondary Electron Emission in a Triode Carbon Nanotube Field Emission Display and Its Influence on the Image Quality

Fabrication of Triode Field Emission Display Using Metal-Gate-plate

Study of vacuum-sealed carbon nanotube field emission display using vacuum micro electron source based on planar gate structure

Fabrication of a Triode Field Emission Display Using Screen-Printing Process

Development of Carbon Nanotube/Nanofiber Field Emission Display

Research on key techniques of carbon nanotube field emission display

Carbon Nanotube Displays

Application of carbon nanotubes in displays

Fabrication of Diode-Type Field Emission Display Module with Carbon Nanotube Cathode

A novel triode-type carbon nanotube field emission micro-cathode fabricated by using electrochemical and micromachining

Carbon Nanotube Field Emission Displays and Their Fully Printing Fabrication Techniques

Study on The Architecture for Triode Carbon Nanotube Field Emission Display Based on Screen-printing Process

Fabrication of Field Emission Triodes Using Carbon Nanofibers

Various Nanostuctured Carbon Films For Fed Applications

Nanostructure carbon for FED and white LED application

Carbon Nanotube Lateral Field Emission Device with Embedded Field Effect Transistor

Fabrication of Field Emission Device With Lateral-Cathode Triode for Lighting Applications