Abstract:Software-defined radio transceivers, wireless infrastructure equipment, and test equipment require the local oscillator (LO) to cover a very wide range of the output frequencies while meet the phase noise performance. The most straightforward method for a wide tuning range is to adopt multiple separated oscillators. However, this method suffers from the bulky area and relatively complicated multiplexing functions. The authors in [1] introduces triple-coupled inductors that create multiple resonant frequency in a high-order resonator. Nevertheless, the impedance magnitude looking into either port of the high-order resonator shows higher peak value at the lower resonant frequency, which makes it difficult to sustain stable oscillation at higher resonant frequency when the coupling factor is large. The VCO in [2] exploits series 8-shaped coils to generate two oscillation modes without coupling between each other while occupying compact area. However, the quality factor of the 8-shaped inductor is considerably lower than a typical octagonal inductor thereby degrading the oscillator phase noise. In order to solve the above-mentioned issues, a dual-core quad-mode orthogonal-coupled VCO using parallel 8-shaped resonator is proposed. Each core in the proposed VCO have two modes, with one mode being equivalent to the 8-shaped inductor, which allows both cores to be orthogonal to each other by proper configurations.

Design of Frequency Doubling VCO for Bluetooth Transceiver

A 60GHz voltage-controlled oscillator with a 3.6GHz tuning range in 180nm CMOS technology

A Two-stage VCO With Extra Wide Tuning Range

An Inverted Complementary Cross-Coupled VCO to Reduce Phase Noise Sensitivity to KVCO

A 3 GHz Low Power LC VCO with Voltage Boosted Circuit from 0.5 V Supply

Design of low power and low phase noise LC-VCO for Bluetooth/WLAN applications

A Class-C LC VCO for 802.11 B/g/n and Bluetooth

A Class-C Lc Vco For 802.11 Bigin And Bluetooth

8.64-11.62 Ghz Cmos Vco And Divider In A Zero-If 802.11a/B/G Wlan And Bluetooth Application

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

A 2. 4GHz Quadrature Output Frequency Synthesizer

2.4 GHz CMOS quadrature voltage-controlled oscillator based on symmetrical spiral inductors and differential diodes

Low-power CMOS VCO with dual-band local oscillating signal outputs for 5/2.5-GHz WLAN transceivers

A 2.4GHz CMOS Injection-Locked Frequency Doubler

A 0.4–6-Ghz Frequency Synthesizer Using Dual-Mode VCO for Software-Defined Radio

An 8.2-to-21.5 GHz Dual-Core Quad-Mode Orthogonal-Coupled VCO with Concurrently Dual-Output Using Parallel 8-Shaped Resonator

An Ultra-Wideband VCO Using Digitally Controlled Varactor Arrays in 40-Nm CMOS Technology

A 31–46 GHz Dual-Core Class-C VCO Using Switchable Transformers in 28-Nm CMOS

A Wide Tuning Range Dual-Core Quad-Mode Orthogonal-Coupled VCO With Concurrently Dual-Output Using Parallel 8-Shaped Resonator

Integrated Low-Power CMOS VCO and Its Divide-by-2 Dividers

Design of a 4.224GHz Quadrature LC-VCO