Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Low-power CMOS VCO with dual-band local oscillating signal outputs for 5/2.5-GHz WLAN transceivers

Low-power CMOS VCO and its divide-by-2 dividers with quadrature outputs for 5 GHz/2.5 GHz WLAN transceivers

Low-Power Cmos Vco And Its Divide-By-2 Dividers With Quadrature Outputs

Integrated Low-Power CMOS VCO and Its Divide-by-2 Dividers

A Low Power Sub-GHz PLL with Optimized LO Distribution Circuit

A Low Power Sub-GHz PLL with Optimized Class-C Voltage-controlled Oscillator

A 60GHz voltage-controlled oscillator with a 3.6GHz tuning range in 180nm CMOS technology

2.4 GHz CMOS quadrature voltage-controlled oscillator based on symmetrical spiral inductors and differential diodes

A 5ghz Cmos Vco For Ieee 802.11a Wlan Application

A Compact and Low Power 5–10 GHz Quadrature Local Oscillator for Cognitive Radio Applications

A 3 GHz Low Power LC VCO with Voltage Boosted Circuit from 0.5 V Supply

A 3.01–3.82 GHz CMOS LC Voltage-Controlled Oscillator with 6.29% VCO-gain Variation for WLAN Applications

An Ultra-Low-Voltage High-Performance VCO in 0.13 μm CMOS

Design of low power and low phase noise LC-VCO for Bluetooth/WLAN applications

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

An 8.2-to-21.5 GHz Dual-Core Quad-Mode Orthogonal-Coupled VCO with Concurrently Dual-Output Using Parallel 8-Shaped Resonator

A 1.8-V 2.4/5.15-Ghz Dual-Band LCVCO in 0.18-/Spl Mu/m CMOS Technology

A 2ghz Low Power Differentially Tuned CMOS Monolithic LC-VCO

An RF Low Power Quadrature LO Generator Based on ILFD

A Novel CMOS Quadrature VCO Based on Symmetrical Spiral Inductors and Differential Diodes