Abstract:The rapid development of the next-generation high-speed wireless communication system has set increasingly stringent requirements on the spectral purity of local RF oscillators. Low phase noise is crucial to support advanced modulation scheme enabling high data-rates wireless link [1]. A viable popular approach is to coupled N identical oscillators together to improve the phase noise by 10log <inf xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">10</inf> N at the cost of N times higher power [2]–[6]. Nevertheless, the coupling network needs to be designed carefully to avoid undesired multi-tone concurrent oscillations. Besides, area occupation is another issue of multi-core VCOs. The star-geometry as shown in Fig. 1. (bottom left), which is simple N times duplication of single core, occupies N times larger area so comes with an area penalty [3]–[5]. To solve this problem, circular geometry is proposed where the passives are merged into a single passive structure and the minimal realizable inductance is reduced while keeping a high Q factor [6]–[7]. In order to further reduce the silicon area, a square-geometry quad-core oscillator with inductor sharing technique is proposed in this paper and it exhibits a compact area of 0.09 mm <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> , which is the smallest quad-core VCO operating at a similar oscillation frequency. The unwanted mode is suppressed by the metal trace that connects the drain node of adjacent cores. Thanks to the proposed square-geometry and inductor sharing technique, the proposed quad-core class-F VCO can further reduce the area occupation. The proposed VCO is fabricated in 65nm CMOS technology. The measured phase noise is -137.2 dB/Hz at 10 MHz offset frequency from a carrier of 19 GHz, which translates to the FoM of 186.1 dBc/Hz.

Design of a 4.224GHz Quadrature LC-VCO

A Superharmonic Injection based G-band Quadrature VCO in CMOS

A 60GHz voltage-controlled oscillator with a 3.6GHz tuning range in 180nm CMOS technology

A 4.4-Ghz 193.2-Db FoM 8-Shaped-inductor Based LC-VCO Using Orthogonal-Coupled Triple-Coil Transformer

A High Performance Ultra Low Power 4.224 GHz Quadrature LC Voltage Controlled Oscillator

A Power-Optimized CMOS Quadrature VCO with Wide-Tuning Range for UWB Receivers

A Compact Square-Geometry Quad-Core 19 GHz Class-F VCO with Parallel Inductor-sharing Technique achieving -137.2 dBc/Hz Phase Noise at 10MHz Offset

Analyze and Design 10-Ghz 0.8-VDD -117Dbc/hz Quadrature LC-VCO in 120nm CMOS Technology

High Performance QVCO Design with Series Coupling in CMOS Technology

Design of Quadrature VCO Based on Standard CMOS Process

Some design aspects on 5GHz CMOS quadrature VCO with fully integrated LC-tank

A 5.6∼8.2ghz QVCO with a New DCCA Circuit

An 8.2 GHz triple coupling low-phase-noise class-F QVCO in 65nm CMOS.

A Wide Band Differentially Switch-Tuned CMOS Monolithic Quadrature VCO with a Low Kvco and High Linearity

2.4 GHz CMOS quadrature voltage-controlled oscillator based on symmetrical spiral inductors and differential diodes

A 5.6 Similar To 8.2ghz Qvco With A New Dcca Circuit

A 3.01–3.82 GHz CMOS LC Voltage-Controlled Oscillator with 6.29% VCO-gain Variation for WLAN Applications

A 4.2-5 GHz, Low Phase Noise LC-VCO with Constant Bandwidth and Small Tuning Gain

Low phase noise injection-locked doubler-based quadrature CMOS VCO

Design of low power and low phase noise LC-VCO for Bluetooth/WLAN applications

A 5-8 GHz Wideband and Low Phase Noise Cross-Coupled LC VCO Using 6-bit DCCA in 40nm CMOS Process