Abstract:In this work, the hydrogen desorption properties of the novel Mg-Al-H hydrogen storage composites prepared by ball-milling the as-received magnesium hydride (MgH2) and the as-prepared aluminum hydride (AlH3) with different molar ratios (1:1, 1:0.5, and 1:0.25) are investigated systematically. Nonisothermal desorption measurements show that more than 7.51 wt % of hydrogen is released from the Mg-Al-H composites when they are heated from room temperature to 500 degrees C. Thermal analysis by differential scanning calorimeter (DSC) and hydrogen desorption spectrum by mass spectrometer (MS-H-2) are used synchronously to study the desorption process of the Mg-Al-H. The onset hydrogen desorption temperature of MgH2 in the MgH2 + AlH3 composite is dramatically reduced from 320 degrees C for the pure MgH2 to below 252 degrees C. The DSC/MS-H-2 and the X-ray diffraction (XRD) analyses show that the desorption of MgH2 in the Mg-Al-H composite is composed of two steps with the reaction between MgH2 and Al forming Mg17Al12 as the first step and the self-decomposition of the residual MgH2 as the second step. Isothermal desorptions show that the desorption kinetics of the MgH2 in the Mg-Al-H composite is significantly improved. The apparent activation energy for the desorption of MgH2 in the MgH2 + 0.25AlH(3) is reduced to 144.6 kJ/mol, which contributes to the improvement in the desorption kinetics of MgH2. The Johnson-Mehl-Avrami (JMA) kinetic studies indicate that the desorption kinetic model of MgH2 in the Mg-Al-H composite is different from the pure MgH2. Concerning the reversibility, under the conditions of 300 degrees C and 5 MPa H-2, MgH2 in the Mg-Al-H composite is almost fully recovered after absorption for 5 h while it is partially recovered for the pure MgH2. Among the samples studied, the MgH2 + 0.25AlH(3) composite exhibits the highest reversible hydrogen storage capacity of 6.10 wt % (H/M).

Effect of preparation methods on hydriding properties of La1.5Mg17Ni0.5 composite materials

Effect of Preparation Methods on Hydriding Properties of La1.5Mg17 Ni0.5 Composite Materials

Influence of preparing methods on hydriding properties of La1.5Mg17Ni0.5

Preparation and Properties of Mg-based Hydrogen Storage Alloys for Hybrid Electric Vehicle

Microstructure and Hydrogen Storage Characteristics of Nanocrystalline Mg+xwt% LaMg2Ni (x=0–30) Composites

An Investigation on the Reaction Mechanism of LiAlH4–MgH2 Hydrogen Storage System

Investigation on reversible hydrogen storage properties of Li3AlH6/2LiNH2 composite

Microstructure And Hydrogen Storage Properties Of La1.8ca0.2mg14ni3 + X% Ti Composites

Hydrogen Storage Properties of La1.8Ca0.2Mg14Ni3 Alloy Prepared by Ball Milling in Different Milling Environments

Synergistic effects of La2Mg17/Ni/H system on hydrogen storage

Hydrogen desorption properties of the MgH2-AlH3 composites

The Recent Progress in the Preparation of Magnesium Based Hydrogen Storage Materials by Hydriding Combustion Synthesis

Significantly Improved Hydrogen Desorption Property of La2Mg17 Alloy Modified with Ni–Al Nanocrystalline

The Effect of Mg Content on Microstructure and Hydrogen Absorption Properties of Mechanical Alloyed MmNi3.5(CoAlMn)1.5–Mg

Hydriding Characteristics of Mg2NiMg2Ni Prepared by Mechanical Milling of the Product of Hydriding Combustion Synthesis

Magnesium-nickel Hydrogen Storage Alloys Prepared by Hydriding Combustion Synthesis Followed by Mechanical Milling

Hydriding combustion synthesis of Mg–CaNi5 composites

Effect of annealing treatment on the anti-pulverization and anti-corrosion properties of La0.67Mg0.33Ni2.5Co0.5 hydrogen storage alloy

Hydrogen storage properties of Mg-23.3wt.%Ni eutectic alloy prepared via hydriding combustion synthesis followed by mechanical milling

Hydrogen Storage in Mg-Ni-Type Alloys with La and Sm Incorporation

Effect of LaH3 Additive on Microstructures and Hydrogen Storage Properties of V40Ti26Cr26Fe8 Alloys Prepared by Hydride Powder Sintering Method