Abstract:The bi-reforming of methane (BRM) is a promising process which converts greenhouse gases to syngas with a flexible H2/CO ratio. As there are many factors that affect this process, the coupled effects of multi-parameters on the BRM product are investigated based on Gibbs free energy minimization. Establishing a reliable model is the foundation of process optimization. When three input parameters are changed simultaneously, the resulting BRM products are used as the dataset to train three artificial neural network (ANN) models, which aim to establish the BRM prediction model. Finally, the trained ANN models are used to predict the BRM products when the conditions vary in and beyond the training range to test their performances. Results show that increasing temperature is beneficial to the conversion of CH4. When the molar flow of H2O is at a low level, the increase in CO2 can enhance the H2 generation. While it is more than 0.200 kmol/h, increasing the CO2 flowrate leads to the increase and then decrease in the H2 molar flow in the reforming products. When the numbers of hidden layer neurons in ANN models are set as (3, 3), (3, 6) and (6, 6), all the correlation coefficients of training, validation and test are higher than 0.995. When these ANN models are used to predict the BRM products, the variation range of the prediction error becomes narrower, and the standard deviation decreases with the increase in neuron number. This demonstrates that the ANN model with more neurons has a higher accuracy. The ANN model with neuron numbers of (6, 6) can be used to predict the BRM products even when the operating conditions are beyond the training ranges, demonstrating that this model has good extension performance. This work lays the foundation for an artificial intelligent model for the BRM process, and established ANN models can be further used to optimize the operating parameters in future work.

Modeling of Bulk Copolymerization of Styrene and Maleic Anhydride Based on the Artificial Neural Networks

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene Glycol): Modeling and Simulation of Semi‐Batch and Continuous Processes

Continuous Thermal Bulk Copolymerization of Styrene and Maleic Anhydride

Semicontinuous thermal bulk copolymerization of styrene and maleic anhydride: Experiments and reactor model

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene glycol): Kinetics and Modeling

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(Propylene Glycol): Particle Growth

Studies on the continuous precipitation copolymerization of acrylonitrile in aqueous medium with high monomer feed concentration: I conversion, MW and MWD

Study on Styrene-Maleic Anhydride Copolymer with High Content of Maleic Anhydride

ARX-NNPLS Model Based Optimization Strategy and Its Application in Polymer Grade Transition Process*

Product Distributions of Benzene Alkylation with Propylene Estimation Using Artificial Neural Network (ANN)

Melt Index Prediction Based on Bootstrap Aggregated Neural Networks

The Study for Optimization of Chromatographic Condition by Means of Artificial Neural Networks

Direct Prediction of Steam Cracking Products from Naphtha Bulk Properties: Application of the Two Sub-Networks ANN

Radial Basis Function Neural Network and Overlay Sampling Uniform Design Toward Polylactic Acid Molecular Weight Prediction

Nonlinear semi-parametric modeling method based on GA-ANN

A Neural Network Modeling Method for Batch Process

Artificial Neural Network Modeling in the Presence of Uncertainty for Predicting Hydrogenation Degree in Continuous Nitrile Butadiene Rubber Processing

Development of hybrid (AI/first principle) models for the optimization of styrene polymerization processes

Catalyst Optimization Design Based on Artificial Neural Network

Artificial Neural Network Model for the Prediction of Methane Bi-Reforming Products Using CO2 and Steam

Artificial Neural Network Aided Design of Catalyst for Propane Ammoxidation