Abstract:The free-radical grafting of the multimonomer system of pentaerythritol triacrylate (PETA) and styrene (St) onto polypropylene (PP) in the melt state was studied by reactive extrusion. The effects of the St and initiator concentrations on the grafting reaction were investigated by means of the melt flow rate, gel permeation chromatography (GPC), and Fourier transform infrared spectroscopy. The results showed that the use of St as a comonomer could effectively depress the degradation of PP and enhance the grafting degree of PETA. Increasing the peroxide level promoted the degradation of PP and reduced the grafting degree of PETA. When the molar ratio of St to PETA was 3 : 1, the GPC data showed that the molecular weight of the grafted PP sample was almost equal to or a little higher than that of virgin PP, suggesting that almost no chain scission occurred. In the presence of St, the dominant grafting mechanism was that St reacted with the PP macroradicals to form more stable St macroradicals, and thus P scission was limited. Then, St macroradicals reacted with PETA to form PETA-grafted PP. X-ray diffraction results showed that the grafted chains not only had a good nucleating effect on PP crystallization but also might induce the formation of beta-form crystals. The presence of ungrafted PETA increased the crystallization and melting temperatures of PP; however, the PETA-grafted samples showed higher crystallization and melting temperatures than physically blended samples. (c) 2008 Wiley Periodicals, Inc.

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(Propylene Glycol): Particle Growth

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene glycol): Kinetics and Modeling

Graft Copolymerization of Styrene and Acrylonitrile in the Presence of Poly(propylene Glycol): Modeling and Simulation of Semi‐Batch and Continuous Processes

Macromol. React. Eng. 9–10/2012

Studies on grafting kinetics of bulk copolymerization of styrene onto rubber(I) - Grafting behavior

Kinetics and Modeling of Vinyl Acetate Graft Polymerization from Poly(ethylene Glycol)

Modeling and Experimentation of RAFT Solution Copolymerization of Styrene and Butyl Acrylate, Effect of Chain Transfer Reactions on Polymer Molecular Weight Distribution

Macromol. React. Eng. 4/2008

Monte Carlo Simulation of Solid Phase Graft Polymerization of Acrylic Acid Onto Polypropylene

Study on Radiation Induced Graft of Styrene-Divinylbenzene Onto Polypropylene Fiber

Structure and Rheological Properties of the Products of Solid-State Graft Polymerization of Styrene in Annealed Polypropylene Reactor Granules

Synthesis and Characterization of Solid-Phase Graft Copolymer of Polypropylene with Styrene and Maleic Anhydride

Grafting–through Strategy in Emulsion: an Eco–friendly and Effective Route for the Synthesis of Graft Copolymers

Process of Grafting Styrene Onto Lldpe by Swelling and Suspension Copolymerization

SYNTHESIS OF POLY (PROPYLENE GLYCOL-g-STYRENE) FROM ATOM TRANSFER RADICAL POLYMERIZATION

Styrene‐assisted Melt Free‐radical Grafting of Pentaerythritol Triacrylate Onto Polypropylene and Its Crystallization Behavior

Synthesis and Characterization of Graft Copolymers Poly(Isoprene-G-Styrene) of High Molecular Weight by A Combination of Anionic Polymerization and Emulsion Polymerization

Synthesis and Reaction Kinetics Model of Suspension Phase Grafting Polypropylene with Dual Monomers

Synthesis and characterization of polyethylene-octene copolymer grafting styrene-acrylonitrile copolymer

Synthesis of Graft Copolymer of Styrene and Acrylonitrile Onto Poly (butyl Acrylate) by Using Polymeric Peroxide

Bridging principal component analysis and method of moments based parameter estimation for grafting of polybutadiene with styrene